feat(matter): New Matter Endpoint (espressif#10628)

* feat(matter): add new endpoint - color temperature light

---------

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

Author: SuGlider

CMakeLists.txt

@@ -169,6 +169,8 @@ set(ARDUINO_LIBRARY_OpenThread_SRCS
 set(ARDUINO_LIBRARY_Matter_SRCS
   libraries/Matter/src/MatterEndpoints/MatterOnOffLight.cpp
   libraries/Matter/src/MatterEndpoints/MatterDimmableLight.cpp
+  libraries/Matter/src/MatterEndpoints/MatterColorTemperatureLight.cpp
+  libraries/Matter/src/MatterUtil/ColorFormat.cpp
   libraries/Matter/src/Matter.cpp)
 
 set(ARDUINO_LIBRARY_PPP_SRCS

libraries/Matter/examples/MatterDimmableLight/MatterDimmableLight.ino

@@ -23,8 +23,8 @@ MatterDimmableLight DimmableLight;
 
 // it will keep last OnOff & Brightness state stored, using Preferences
 Preferences matterPref;
-const char *onOffPrefKey = "OnOffState";
-const char *brightnessPrefKey = "BrightnessState";
+const char *onOffPrefKey = "OnOff";
+const char *brightnessPrefKey = "Brightness";
 
 // set your board RGB LED pin here
 #ifdef RGB_BUILTIN

libraries/Matter/examples/MatterOnOffLight/MatterOnOffLight.ino

@@ -23,7 +23,7 @@ MatterOnOffLight OnOffLight;
 
 // it will keep last OnOff state stored, using Preferences
 Preferences matterPref;
-const char *onOffPrefKey = "OnOffState";
+const char *onOffPrefKey = "OnOff";
 
 // set your board LED pin here
 #ifdef LED_BUILTIN

libraries/Matter/examples/Matter_CW_WW_Light/Matter_CW_WW_Light.ino

@@ -0,0 +1,196 @@
+// Copyright 2024 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// Matter Manager
+#include <Matter.h>
+#include <WiFi.h>
+#include <Preferences.h>
+
+// List of Matter Endpoints for this Node
+// Color Temperature CW/WW Light Endpoint
+MatterColorTemperatureLight CW_WW_Light;
+
+// it will keep last OnOff & Brightness state stored, using Preferences
+Preferences matterPref;
+const char *onOffPrefKey = "OnOff";
+const char *brightnessPrefKey = "Brightness";
+const char *temperaturePrefKey = "Temperature";
+
+// set your board RGB LED pin here
+#ifdef RGB_BUILTIN
+const uint8_t ledPin = RGB_BUILTIN;
+#else
+const uint8_t ledPin = 2;  // Set your pin here if your board has not defined LED_BUILTIN
+#warning "Do not forget to set the RGB LED pin"
+#endif
+
+// set your board USER BUTTON pin here
+const uint8_t buttonPin = 0;  // Set your pin here. Using BOOT Button. C6/C3 use GPIO9.
+
+// WiFi is manually set and started
+const char *ssid = "your-ssid";          // Change this to your WiFi SSID
+const char *password = "your-password";  // Change this to your WiFi password
+
+// Set the RGB LED Light based on the current state of the Color Temperature Light
+bool setLightState(bool state, uint8_t brightness, uint16_t temperature_Mireds) {
+
+  if (state) {
+#ifdef RGB_BUILTIN
+    CtColor_t ct = {temperature_Mireds};
+    RgbColor_t rgb_ct = CTToRgb(ct);
+    // simple intensity correction
+    float brightnessPercent = (float)brightness / MatterColorTemperatureLight::MAX_BRIGHTNESS;
+    rgb_ct.r = brightnessPercent * rgb_ct.r;
+    rgb_ct.g = brightnessPercent * rgb_ct.g;
+    rgb_ct.b = brightnessPercent * rgb_ct.b;
+    // set the RGB LED
+    rgbLedWrite(ledPin, rgb_ct.r, rgb_ct.g, rgb_ct.b);
+#else
+    // No Color RGB LED, just use the brightness to control the LED
+    analogWrite(ledPin, brightness);
+#endif
+  } else {
+    digitalWrite(ledPin, LOW);
+  }
+  // store last Brightness and OnOff state for when the Light is restarted / power goes off
+  matterPref.putUChar(brightnessPrefKey, brightness);
+  matterPref.putBool(onOffPrefKey, state);
+  matterPref.putUShort(temperaturePrefKey, temperature_Mireds);
+  // This callback must return the success state to Matter core
+  return true;
+}
+
+void setup() {
+  // Initialize the USER BUTTON (Boot button) GPIO that will act as a toggle switch
+  pinMode(buttonPin, INPUT_PULLUP);
+  // Initialize the LED (light) GPIO and Matter End Point
+  pinMode(ledPin, OUTPUT);
+
+  Serial.begin(115200);
+  while (!Serial) {
+    delay(100);
+  }
+
+  // We start by connecting to a WiFi network
+  Serial.print("Connecting to ");
+  Serial.println(ssid);
+  // enable IPv6
+  WiFi.enableIPv6(true);
+  // Manually connect to WiFi
+  WiFi.begin(ssid, password);
+  // Wait for connection
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+  Serial.println("\r\nWiFi connected");
+  Serial.println("IP address: ");
+  Serial.println(WiFi.localIP());
+  delay(500);
+
+  // Initialize Matter EndPoint
+  matterPref.begin("MatterPrefs", false);
+  // default OnOff state is ON if not stored before
+  bool lastOnOffState = matterPref.getBool(onOffPrefKey, true);
+  // default brightness ~= 6% (15/255)
+  uint8_t lastBrightness = matterPref.getUChar(brightnessPrefKey, 15);
+  // default temperature ~= 454 Mireds (Warm White)
+  uint16_t lastTemperature = matterPref.getUShort(temperaturePrefKey, MatterColorTemperatureLight::WARM_WHITE_COLOR_TEMPERATURE);
+  CW_WW_Light.begin(lastOnOffState, lastBrightness, lastTemperature);
+  // set the callback function to handle the Light state change
+  CW_WW_Light.onChange(setLightState);
+
+  // lambda functions are used to set the attribute change callbacks
+  CW_WW_Light.onChangeOnOff([](bool state) {
+    Serial.printf("Light OnOff changed to %s\r\n", state ? "ON" : "OFF");
+    return true;
+  });
+  CW_WW_Light.onChangeBrightness([](uint8_t level) {
+    Serial.printf("Light Brightness changed to %d\r\n", level);
+    return true;
+  });
+  CW_WW_Light.onChangeColorTemperature([](uint16_t temperature) {
+    Serial.printf("Light Color Temperature changed to %d\r\n", temperature);
+    return true;
+  });
+
+  // Matter beginning - Last step, after all EndPoints are initialized
+  Matter.begin();
+  // This may be a restart of a already commissioned Matter accessory
+  if (Matter.isDeviceCommissioned()) {
+    Serial.println("Matter Node is commissioned and connected to Wi-Fi. Ready for use.");
+    Serial.printf(
+      "Initial state: %s | brightness: %d | Color Temperature: %d mireds \r\n", CW_WW_Light ? "ON" : "OFF", CW_WW_Light.getBrightness(),
+      CW_WW_Light.getColorTemperature()
+    );
+    // configure the Light based on initial on-off state and brightness
+    CW_WW_Light.updateAccessory();
+  }
+}
+// Button control
+uint32_t button_time_stamp = 0;                 // debouncing control
+bool button_state = false;                      // false = released | true = pressed
+const uint32_t debouceTime = 250;               // button debouncing time (ms)
+const uint32_t decommissioningTimeout = 10000;  // keep the button pressed for 10s to decommission the light
+
+void loop() {
+  // Check Matter Light Commissioning state, which may change during execution of loop()
+  if (!Matter.isDeviceCommissioned()) {
+    Serial.println("");
+    Serial.println("Matter Node is not commissioned yet.");
+    Serial.println("Initiate the device discovery in your Matter environment.");
+    Serial.println("Commission it to your Matter hub with the manual pairing code or QR code");
+    Serial.printf("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
+    Serial.printf("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
+    // waits for Matter Light Commissioning.
+    uint32_t timeCount = 0;
+    while (!Matter.isDeviceCommissioned()) {
+      delay(100);
+      if ((timeCount++ % 50) == 0) {  // 50*100ms = 5 sec
+        Serial.println("Matter Node not commissioned yet. Waiting for commissioning.");
+      }
+    }
+    Serial.printf(
+      "Initial state: %s | brightness: %d | Color Temperature: %d mireds \r\n", CW_WW_Light ? "ON" : "OFF", CW_WW_Light.getBrightness(),
+      CW_WW_Light.getColorTemperature()
+    );
+    // configure the Light based on initial on-off state and brightness
+    CW_WW_Light.updateAccessory();
+    Serial.println("Matter Node is commissioned and connected to Wi-Fi. Ready for use.");
+  }
+
+  // A button is also used to control the light
+  // Check if the button has been pressed
+  if (digitalRead(buttonPin) == LOW && !button_state) {
+    // deals with button debouncing
+    button_time_stamp = millis();  // record the time while the button is pressed.
+    button_state = true;           // pressed.
+  }
+
+  // Onboard User Button is used as a Light toggle switch or to decommission it
+  uint32_t time_diff = millis() - button_time_stamp;
+  if (button_state && time_diff > debouceTime && digitalRead(buttonPin) == HIGH) {
+    button_state = false;  // released
+    // Toggle button is released - toggle the light
+    Serial.println("User button released. Toggling Light!");
+    CW_WW_Light.toggle();  // Matter Controller also can see the change
+
+    // Factory reset is triggered if the button is pressed longer than 10 seconds
+    if (time_diff > decommissioningTimeout) {
+      Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
+      CW_WW_Light = false;  // turn the light off
+      Matter.decommission();
+    }
+  }
+}

libraries/Matter/examples/Matter_CW_WW_Light/ci.json

@@ -0,0 +1,7 @@
+{
+  "fqbn_append": "PartitionScheme=huge_app",
+  "requires": [
+    "CONFIG_SOC_WIFI_SUPPORTED=y",
+    "CONFIG_ESP_MATTER_ENABLE_DATA_MODEL=y"
+  ]
+}

libraries/Matter/keywords.txt

@@ -10,7 +10,12 @@ Matter	KEYWORD1
 ArduinoMatter	KEYWORD1
 MatterOnOffLight	KEYWORD1
 MatterDimmableLight	KEYWORD1
+MatterColorTemperatureLight KEYWORD1
 MatterEndPoint	KEYWORD1
+CtColor_t	KEYWORD1
+XyColor_t	KEYWORD1
+HsvColor_t	KEYWORD1
+RgbColor_t	KEYWORD1
 
 #######################################
 # Methods and Functions (KEYWORD2)
@@ -30,12 +35,28 @@ setOnOff	KEYWORD2
 getOnOff	KEYWORD2
 setBrightness	KEYWORD2
 getBrightness	KEYWORD2
+setColorTemperature	KEYWORD2
+getColorTemperature	KEYWORD2
 toggle	KEYWORD2
 updateAccessory	KEYWORD2
 onChange	KEYWORD2
 onChangeOnOff	KEYWORD2
 onChangeBrightness	KEYWORD2
+onChangeColorTemperature KEYWORD2
+XYToRgb KEYWORD2
+HsvToRgb KEYWORD2
+CTToRgb KEYWORD2
+RgbToHsv KEYWORD2
 
 #######################################
 # Constants (LITERAL1)
 #######################################
+
+MAX_BRIGHTNESS  LITERAL1
+MAX_COLOR_TEMPERATURE  LITERAL1
+MIN_COLOR_TEMPERATURE  LITERAL1
+COOL_WHITE_COLOR_TEMPERATURE  LITERAL1
+DAYLIGHT_WHITE_COLOR_TEMPERATURE  LITERAL1
+WHITE_COLOR_TEMPERATURE  LITERAL1
+SOFT_WHITE_COLOR_TEMPERATURE  LITERAL1
+WARM_WHITE_COLOR_TEMPERATURE  LITERAL1

libraries/Matter/src/Matter.h

@@ -18,8 +18,10 @@
 
 #include <Arduino.h>
 #include <esp_matter.h>
+#include <MatterUtil/ColorFormat.h>
 #include <MatterEndpoints/MatterOnOffLight.h>
 #include <MatterEndpoints/MatterDimmableLight.h>
+#include <MatterEndpoints/MatterColorTemperatureLight.h>
 
 using namespace esp_matter;
 
@@ -47,6 +49,7 @@ class ArduinoMatter {
   // list of Matter EndPoints Friend Classes
   friend class MatterOnOffLight;
   friend class MatterDimmableLight;
+  friend class MatterColorTemperatureLight;
 
 protected:
   static void _init();