updated h7 lite con symlinks

Author: jhansson-ard

content/hardware/04.pro/boards/portenta-h7-lite-connected/tutorials/ble-connectivity

@@ -0,0 +1 @@
+../../portenta-h7/tutorials/ble-connectivity

content/hardware/04.pro/boards/portenta-h7-lite-connected/tutorials/dual-core-processing

@@ -0,0 +1 @@
+../../portenta-h7/tutorials/dual-core-processing

content/hardware/04.pro/boards/portenta-h7-lite-connected/tutorials/flash-optimized-key-value-storage

@@ -0,0 +1 @@
+../../portenta-h7/tutorials/flash-optimized-key-value-storage

content/hardware/04.pro/boards/portenta-h7-lite-connected/tutorials/getting-started-openmv-micropython

@@ -0,0 +1 @@
+../../portenta-h7/tutorials/getting-started-openmv-micropython

content/hardware/04.pro/boards/portenta-h7-lite-connected/tutorials/lauterbach-debugger

@@ -0,0 +1 @@
+../../portenta-h7/tutorials/lauterbach-debugger

content/hardware/04.pro/boards/portenta-h7-lite-connected/tutorials/por-ard-ap

@@ -0,0 +1 @@
+../../portenta-h7/tutorials/reading-writing-flash-memory

content/hardware/04.pro/boards/portenta-h7-lite-connected/tutorials/por-ard-ble

@@ -0,0 +1 @@
+../../portenta-h7/tutorials/setting-up-portenta

content/hardware/04.pro/boards/portenta-h7-lite-connected/tutorials/por-ard-dcp

@@ -0,0 +1 @@
+../../portenta-h7/tutorials/usb-host

content/hardware/04.pro/boards/portenta-h7-lite-connected/tutorials/por-ard-flash

@@ -0,0 +1 @@
+../../portenta-h7/tutorials/wifi-access-point

content/hardware/04.pro/boards/portenta-h7-lite-connected/tutorials/por-ard-gs

@@ -50,7 +50,7 @@ To best illustrate the idea of dual core processing, you will be running two sep
 ### 1. The Basic Setup
 Begin by plugging-in your Portenta board to your computer using an appropriate USB-C cable and have the  Arduino IDE or the Arduino Pro IDE  open. If this is your first time running Arduino sketch files on the board, we suggest you check out how to [Setting Up Portenta H7 For Arduino](por-ard-gs) before you proceed.
 
-![A Basic setup of the board attached to your computer](../por-ard-gs/assets/por_ard_gs_basic_setup.svg)
+![A Basic setup of the board attached to your computer](../setting-up-portenta/assets/por_ard_gs_basic_setup.svg)
 
 **Note:** You can access the examples from the tutorials library once it's installed: **Examples > Arduino_Pro_Tutorials > Dual Core Processing**