Linter

Author: pedromsousalima

content/hardware/08.edu/solution-and-kits/alvik/tutorials/user-manual/assets/unboxing.jpg

@@ -38,7 +38,7 @@ To get started to play with Alvik you will need the following hardware and softw
 
 - Alvik (x1)
 - USB-C® to USB-C® cable (x1)
-- Phillips® Screwdriver (cross head) (x1)
+- Phillips Screwdriver (cross head)(optional) (x1)
 - Computer (x1)
 
 ***Make sure the USB-C® cable you are using works with data lines, not only power lines***
@@ -219,10 +219,6 @@ The Arduino Alvik robot is equipped with an onboard IMU (Inertial Measurement Un
 
 ## Actuators
 
-
-
-
-
 | **Actuator name**        | **Part name**           | **Test program name** |
 |--------------------------|-------------------------|-----------------------|
 | Geared motors w/ encoder | GM12-N20VA-08255-150-EN | wheels_positions.py   |
@@ -236,12 +232,6 @@ The connectors are placed in the back of the robot, the pinout is shown in the f
 
 ![Connectors Pinout](assets/datasheet_connectors.png)
 
-
-The Arduino Alvik robot package includes the following items:
-- Alvik robot
-- USB-C® to USB-C® cable
-- 18650 Li-Ion battery
-
 ## Moving Alvik!
 
 Alvik is equipped with three ready-to-go examples. To choose one of the examples, just turn your Alvik ON, move the switch located at the bottom right corner of the robot to the right, wait until the LEDs turn blue and use the Up and Down buttons to pick one color, then hit the "tick" confirmation button. 
@@ -262,19 +252,13 @@ Alvik comes pre-programmed with a line following algorithm that utilizes its bui
 
 ## Alvik's Firmware
 
-
-
-
-
-
 To get started to play with Alvik you will need the following hardware and software:
 
 ### Hardware Requirements
 
 - Alvik (x1)
 - USB-C® to USB-C® cable (x1)
 - Phillips Screwdriver (cross head)(optional) (x1)
-
 - Computer (x1)
 
 ***Make sure the USB-C® cable you are using works with data lines, not only power lines***