| author | tags | title | description | |
|---|---|---|---|---|
Arduino |
|
Arduino Yún File Write Script |
Demonstrates how to write and execute a shell script with Process. |
This example writes to a file using the FileIO classes into the Yún device's filesystem. A shell script file is created in /tmp, and is executed afterwards.
- Yún board or shield
There is no circuit for this example.
image developed using Fritzing. For more circuit examples, see the Fritzing project page
Include the FileIO header, for communicating with the filesystem.
#include <FileIO.h>
In setup(), initialize Bridge, Serial communication, and FileSystem. Wait for an active serial connection, and call a custom function uploadScript() which will upload your file, before starting loop().
void setup() {
Bridge.begin();
Serial.begin(9600);
while(!Serial); // wait for Serial port to connect.
Serial.println("File Write Script example\n\n");
FileSystem.begin();
uploadScript();
}
loop() will just execute your script every 5 seconds by calling another custom function, runScript().
void loop() {
runScript();
delay(5000);
}
Your uploadScript() function will create a shell script in the Linux file system that will check the network traffic of the WiFi interface. Create the file and open it by creating an instance of the File@ class, and callingFileSystem.open()@@ indicating where you would like to create the script. You'll store the script in "/tmp", which resides in RAM, to preserve the limited number of FLASH memory read/write cycles.
void uploadScript() {
File script = FileSystem.open("/tmp/wlan-stats.sh", FILE_WRITE);
Write the contents of the script to the file with File.print(). begin by printing the header, "#!/bin/s", then the utility ifconfig. @ifconfig@ is a command line utility for controlling network interfaces. you'll be looking at the WiFi interface, which is referred to as "wlan0". The utility grep will search the output of ifconfig. You're looking for the number of bytes received , so search for the keywords "RX bytes" and close the file.
script.print("#!/bin/sh\n");
script.print("ifconfig wlan0 | grep 'RX bytes'\n");
script.close(); // close the file
Instantiate a Process to make the script executable. chmod@ is a command that will change the modes of files. By sending thechmod@@ command and filepath, you can make your shell script run like an application.
Process chmod;
chmod.begin("chmod"); // chmod: change mode
chmod.addParameter("+x"); // x stays for executable
chmod.addParameter("/tmp/wlan-stats.sh");
chmod.run();
}
The runScript() function will create a Process that runs the script and prints the results to the Serial Monitor. Create a named Process, and start your script by calling Process.begin(filepath) and Process.run().
void runScript() {
Process myscript;
myscript.begin("/tmp/wlan-stats.sh");
myscript.run();
Create a string to hold the output, and read the output into it
String output = "";
while (myscript.available()) {
output += (char)myscript.read();
}
Remove the blank spaces at the beginning and end of the string and print it to the serial monitor :
output.trim();
Serial.println(output);
Serial.flush();
}
The complete sketch is below :
/*
Write to file using FileIO classes.
This sketch demonstrate how to write file into the YunShield/Yún filesystem.
A shell script file is created in /tmp, and it is executed afterwards.
created 7 June 2010
by Cristian Maglie
This example code is in the public domain.
http://www.arduino.cc/en/Tutorial/FileWriteScript
*/
#include <FileIO.h>
void setup() {
// Setup Bridge (needed every time we communicate with the Arduino Yún)
Bridge.begin();
// Initialize the Serial
SerialUSB.begin(9600);
while (!SerialUSB); // wait for Serial port to connect.
SerialUSB.println("File Write Script example\n\n");
// Setup File IO
FileSystem.begin();
// Upload script used to gain network statistics
uploadScript();
}
void loop() {
// Run stats script every 5 secs.
runScript();
delay(5000);
}
// this function creates a file into the linux processor that contains a shell script
// to check the network traffic of the WiFi interface
void uploadScript() {
// Write our shell script in /tmp
// Using /tmp stores the script in RAM this way we can preserve
// the limited amount of FLASH erase/write cycles
File script = FileSystem.open("/tmp/wlan-stats.sh", FILE_WRITE);
// Shell script header
script.print("#!/bin/sh\n");
// shell commands:
// ifconfig: is a command line utility for controlling the network interfaces.
// wlan0 is the interface we want to query
// grep: search inside the output of the ifconfig command the "RX bytes" keyword
// and extract the line that contains it
script.print("ifconfig wlan0 | grep 'RX bytes'\n");
script.close(); // close the file
// Make the script executable
Process chmod;
chmod.begin("chmod"); // chmod: change mode
chmod.addParameter("+x"); // x stays for executable
chmod.addParameter("/tmp/wlan-stats.sh"); // path to the file to make it executable
chmod.run();
}
// this function run the script and read the output data
void runScript() {
// Run the script and show results on the Serial
Process myscript;
myscript.begin("/tmp/wlan-stats.sh");
myscript.run();
String output = "";
// read the output of the script
while (myscript.available()) {
output += (char)myscript.read();
}
// remove the blank spaces at the beginning and the ending of the string
output.trim();
SerialUSB.println(output);
SerialUSB.flush();
}
Last revision 2016/05/25 by SM