# Copyright (c) 2014-2015 Arduino LLC. All right reserved. # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public # License as published by the Free Software Foundation; either # version 2.1 of the License, or (at your option) any later version. # # This library is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the GNU Lesser General Public License for more details. # # You should have received a copy of the GNU Lesser General Public # License along with this library; if not, write to the Free Software # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # Arduino SAMD Core and platform. # # For more info: # https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification name=xxxxx boards version=0.0.1 # Compile variables # ----------------- compiler.warning_flags=-w compiler.warning_flags.none=-w compiler.warning_flags.default= compiler.warning_flags.more=-Wall -Wno-expansion-to-defined compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined compiler.path={runtime.tools.arm-none-eabi-gcc.path}/bin/ compiler.c.cmd=arm-none-eabi-gcc compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD -D__SKETCH_NAME__="""{build.project_name}""" compiler.c.elf.cmd=arm-none-eabi-g++ compiler.c.elf.flags=-Os -Wl,--gc-sections -save-temps compiler.S.cmd=arm-none-eabi-gcc compiler.S.flags=-c -g -x assembler-with-cpp -MMD compiler.cpp.cmd=arm-none-eabi-g++ compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -I{build.source.path} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -D__SKETCH_NAME__="""{build.project_name}""" compiler.ar.cmd=arm-none-eabi-ar compiler.ar.flags=rcs compiler.objcopy.cmd=arm-none-eabi-objcopy compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 compiler.elf2hex.bin.flags=-O binary compiler.elf2hex.hex.flags=-O ihex -R .eeprom compiler.elf2hex.cmd=arm-none-eabi-objcopy compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align compiler.size.cmd=arm-none-eabi-size compiler.define=-DARDUINO= compiler.readelf.cmd=arm-none-eabi-readelf # this can be overriden in boards.txt build.extra_flags= build.cache_flags= build.flags.optimize= build.flags.maxspi= build.flags.maxqspi= build.flags.usbstack= build.flags.debug= # These can be overridden in platform.local.txt compiler.c.extra_flags= compiler.c.elf.extra_flags= #compiler.c.elf.extra_flags=-v compiler.cpp.extra_flags= compiler.S.extra_flags= compiler.ar.extra_flags= compiler.elf2hex.extra_flags= compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Core/Include/" "-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/DSP/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.0.path}/CMSIS/Device/ATMEL/" compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math compiler.libraries.ldflags= # USB Flags # --------- build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON -DUSB_CONFIG_POWER={build.usb_power} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}' {build.flags.usbstack} {build.flags.debug} "-I{build.core.path}/TinyUSB" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src" # Default advertised device power setting in mA build.usb_power=100 # Default usb manufacturer will be replaced at compile time using # numeric vendor ID if available or by board's specific value. build.usb_manufacturer="Unknown" # Compile patterns # ---------------- ## Compile c files recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}" ## Compile c++ files recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}" ## Compile S files recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}" ## Create archives # archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value archive_file_path={build.path}/{archive_file} recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}" ## Combine gc-sections, archives, and objects recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} "-L{build.variant.path}" -lm "{build.path}/{archive_file}" -Wl,--end-group ## Create output (bin file) recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin" ## Create output (hex file) recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex" build.preferred_out_format=bin ## Save hex recipe.output.tmp_file={build.project_name}.{build.preferred_out_format} recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format} ## Compute size recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf" recipe.size.regex=\.text\s+([0-9]+).* # # BOSSA # tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path} tools.bossac.cmd=bossac tools.bossac.cmd.windows=bossac.exe tools.bossac.upload.params.verbose=-i -d tools.bossac.upload.params.quiet= tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R tools.bossac.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b # v1.8.0 tools.bossac18.path={runtime.tools.bossac-1.8.0-48-gb176eee.path} tools.bossac18.cmd=bossac tools.bossac18.upload.params.verbose=-i -d tools.bossac18.upload.params.quiet= tools.bossac18.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U -i --offset={upload.offset} -w -v "{build.path}/{build.project_name}.bin" -R tools.bossac18.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA tools.bossac18.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b # # BOSSA (ignore binary size) # tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path} tools.bossacI.cmd=bossac tools.bossacI.cmd.windows=bossac.exe tools.bossacI.upload.params.verbose=-i -d tools.bossacI.upload.params.quiet= tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b # # BOSSA (Smaller packet for Lite support) # tools.bossac_lite.path={runtime.tools.bossac-1.9.1-xxxxxx.path}/bin/ tools.bossac_lite.cmd=bossac tools.bossac_lite.cmd.windows=bossac.exe tools.bossac_lite.upload.params.verbose=-i -d tools.bossac_lite.upload.params.quiet= tools.bossac_lite.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U -i --offset={upload.offset} -w -v "{build.path}/{build.project_name}.bin" -R tools.bossac_lite_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R tools.bossac_lite.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA tools.bossac_lite.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b # # OpenOCD sketch upload # tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path} tools.openocd.cmd=bin/openocd tools.openocd.cmd.windows=bin/openocd.exe tools.openocd.upload.params.verbose=-d2 tools.openocd.upload.params.quiet=-d0 tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown" tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b # Program flashes the binary at 0x0000, so use the linker script without_bootloader tools.openocd.program.params.verbose=-d2 tools.openocd.program.params.quiet=-d0 tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown" tools.openocd.erase.params.verbose=-d3 tools.openocd.erase.params.quiet=-d0 tools.openocd.erase.pattern= tools.openocd.bootloader.params.verbose=-d2 tools.openocd.bootloader.params.quiet=-d0 tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown" # # OpenOCD sketch upload - version with configurable bootloader size # FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences # tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path} tools.openocd-withbootsize.cmd=bin/openocd tools.openocd-withbootsize.cmd.windows=bin/openocd.exe tools.openocd-withbootsize.upload.params.verbose=-d2 tools.openocd-withbootsize.upload.params.quiet=-d0 tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown" # Program flashes the binary at 0x0000, so use the linker script without_bootloader tools.openocd-withbootsize.program.params.verbose=-d2 tools.openocd-withbootsize.program.params.quiet=-d0 tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown" tools.openocd-withbootsize.erase.params.verbose=-d3 tools.openocd-withbootsize.erase.params.quiet=-d0 tools.openocd-withbootsize.erase.pattern= tools.openocd-withbootsize.bootloader.params.verbose=-d2 tools.openocd-withbootsize.bootloader.params.quiet=-d0 tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"