Merge pull request #84 from AlbyIanna/mkrnb1500-cloudblink

add cloud blink example for mkr nb 1500

Author: mastrolinux

examples/NB_Cloud_Blink/NB_Cloud_Blink.ino

@@ -0,0 +1,76 @@
+/* This sketch is used during the getting started tutorial when
+   initialising a Arduino cloud-enabled board with the Arduino
+   cloud for the first time.
+
+   This sketch is compatible with:
+     - MKR NB 1500
+*/
+
+#include <ArduinoIoTCloud.h>
+#include <Arduino_ConnectionHandler.h>
+
+#include "arduino_secrets.h"
+
+String cloudSerialBuffer = ""; // the string used to compose network messages from the received characters
+// handles connection to the network
+NBConnectionHandler ArduinoIoTPreferredConnection(SECRET_OPTIONAL_PIN, SECRET_OPTIONAL_APN, SECRET_OPTIONAL_USER_NAME, SECRET_OPTIONAL_PASSWORD);
+
+void setup() {
+  setDebugMessageLevel(3); // used to set a level of granularity in information output [0...4]
+  Serial.begin(9600);
+  while (!Serial); // waits for the serial to become available
+  ArduinoCloud.begin(ArduinoIoTPreferredConnection); // initialize a connection to the Arduino IoT Cloud
+  pinMode(LED_BUILTIN, OUTPUT);
+}
+
+void loop() {
+  ArduinoCloud.update();
+  // check if there is something waiting to be read
+  if (ArduinoCloud.connected()) {
+    if (CloudSerial.available()) {
+      char character = CloudSerial.read();
+      cloudSerialBuffer += character;
+      // if a \n character has been received, there should be a complete command inside cloudSerialBuffer
+      if (character == '\n') {
+        handleString();
+      }
+    } else { // if there is nothing to read, it could be that the last command didn't end with a '\n'. Check.
+      handleString();
+    }
+    // Just to be able to simulate the board responses through the serial monitor
+    if (Serial.available()) {
+      CloudSerial.write(Serial.read());
+    }
+  }
+}
+void handleString() {
+  // Don't proceed if the string is empty
+  if (cloudSerialBuffer.equals("")) {
+    return;
+  }
+  // Remove leading and trailing whitespaces
+  cloudSerialBuffer.trim();
+  // Make it uppercase;
+  cloudSerialBuffer.toUpperCase();
+  if (cloudSerialBuffer.equals("ON")) {
+    digitalWrite(LED_BUILTIN, HIGH);
+  } else if (cloudSerialBuffer.equals("OFF")) {
+    digitalWrite(LED_BUILTIN, LOW);
+  }
+  sendString(cloudSerialBuffer);
+  // Reset cloudSerialBuffer
+  cloudSerialBuffer = "";
+}
+// sendString sends a string to the Arduino Cloud.
+void sendString(String stringToSend) {
+  // send the characters one at a time
+  char lastSentChar = 0;
+  for (unsigned int i = 0; i < stringToSend.length(); i++) {
+    lastSentChar = stringToSend.charAt(i);
+    CloudSerial.write(lastSentChar);
+  }
+  // if the last sent character wasn't a '\n' add it
+  if (lastSentChar != '\n') {
+    CloudSerial.write('\n');
+  }
+}

examples/NB_Cloud_Blink/arduino_secrets.h

@@ -0,0 +1,4 @@
+#define SECRET_OPTIONAL_PIN ""
+#define SECRET_OPTIONAL_APN ""
+#define SECRET_OPTIONAL_USER_NAME ""
+#define SECRET_OPTIONAL_PASSWORD ""