Sketch uses 946 bytes (3%) of program storage space. Maximum is 30720 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes. C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf -v -patmega328p -catmelice_isp -Pusb -Uflash:w:C:\Users\dimka\AppData\Local\Temp\arduino_build_517394/nano_Blink.ino.hex:i avrdude: Version 6.3-20210108 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf" Using Port : usb Using Programmer : atmelice_isp avrdude: usbhid_open(): No device found avrdude: usbdev_open(): Found Atmel-ICE CMSIS-DAP, serno: J41800104119 avrdude: max packet size expected 912, but found 512 due to EP 0x01's wMaxPacketSize avrdude: Found CMSIS-DAP compliant device, using EDBG protocol AVR Part : ATmega328P Chip Erase delay : 9000 us PAGEL : PD7 BS2 : PC2 RESET disposition : dedicated RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 Programmer Type : JTAG3_ISP Description : Atmel-ICE (ARM/AVR) in ISP mode Vtarget : 4.7 V SCK period : 8.00 us avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.01s avrdude: Device signature = 0x1e950f (probably m328p) avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed To disable this feature, specify the -D option. avrdude: erasing chip avrdude: reading input file "C:\Users\dimka\AppData\Local\Temp\arduino_build_517394/nano_Blink.ino.hex" avrdude: writing flash (946 bytes): Writing | ################################################## | 100% 0.28s avrdude: 946 bytes of flash written avrdude: verifying flash memory against C:\Users\dimka\AppData\Local\Temp\arduino_build_517394/nano_Blink.ino.hex: avrdude: load data flash data from input file C:\Users\dimka\AppData\Local\Temp\arduino_build_517394/nano_Blink.ino.hex: avrdude: input file C:\Users\dimka\AppData\Local\Temp\arduino_build_517394/nano_Blink.ino.hex contains 946 bytes avrdude: reading on-chip flash data: Reading | ################################################## | 100% 0.29s avrdude: verifying ... avrdude: 946 bytes of flash verified avrdude done. Thank you.