Restore 0.9.4

Restore from 0.9.4

Author: marqdevx

examples/TouchPads/Custom_Sensitivity/Custom_Sensitivity.ino

@@ -6,23 +6,23 @@ bool CARRIER_CASE = false;
 // When CARRIER_CASE is true it's set to 4  (further)
 // But if you use Buttons.updateConfig(value) It will not set the above values
 
-unsigned int threshold = 100;
+unsigned int trheshold = 100;
 
 void setup() {
   // put your setup code here, to run once:
   Serial.begin(9600);
   while (!Serial);
 
-  //Now we can set our custom touch threshold
-  carrier.Buttons.updateConfig(threshold);
+  //Now we can set our custom touch trheshold
+  carrier.Buttons.updateConfig(trheshold);
   carrier.begin();
 }
 
 void loop() {
   // put your main code here, to run repeatedly:
   carrier.Buttons.update();
   //Lets test 1 button, they should all react in the same way
-  if (carrier.Button0.getTouch()) {
+  if (carrier.Button1.getTouch()) {
     Serial.println("touching");
   }
 }

examples/TouchPads/Relays_control_Qtouch/Relays_control_Qtouch.ino

@@ -42,7 +42,7 @@ void loop() {
   //The LED changes to Green its going to be NC (Normally Closed) or Orange to NO (Normally Open)
   //Then the middle pad its going to upload the relay status, to confirm both new status
 
-  if (carrier.Button0.onTouchDown()) {
+  if (carrier.Button1.onTouchDown()) {
     newRelay2 = !newRelay2;
     if (newRelay2) {
       carrier.leds.setPixelColor(0, c_orange);
@@ -52,7 +52,7 @@ void loop() {
     carrier.leds.show();
 
   }
-  if (carrier.Button4.onTouchDown()) {
+  if (carrier.Button5.onTouchDown()) {
     newRelay1 = !newRelay1;
     if (newRelay1) {
       carrier.leds.setPixelColor(4, c_orange);
@@ -62,7 +62,7 @@ void loop() {
     carrier.leds.show();
   }
 
-  if (carrier.Button2.onTouchDown()) {
+  if (carrier.Button3.onTouchDown()) {
     carrier.leds.setPixelColor(2, c_orange);
     carrier.leds.show();
 
@@ -90,4 +90,4 @@ void loop() {
 
   delay(20);
 
-}
+}

examples/TouchPads/TouchTypes/TouchTypes.ino

@@ -30,19 +30,19 @@ void loop() {
   // polling the sensor for new measure
   carrier.Buttons.update();
 
-  if (carrier.Button0.onTouchDown()) {
+  if (carrier.Button1.onTouchDown()) {
     Serial.println("Touched Down Button 1");
   }
-  if (carrier.Button1.onTouchUp()) {
+  if (carrier.Button2.onTouchUp()) {
     Serial.println("Release Touch Button 2");
   }
-  if (carrier.Button2.onTouchChange()) {
+  if (carrier.Button3.onTouchChange()) {
     Serial.println("Changed Touch Button 3");
   }
-  if (carrier.Button3.getTouch()) {
+  if (carrier.Button4.getTouch()) {
     Serial.println("Touching Button 4");
   }
-  if (carrier.Button4.getTouch()) {
+  if (carrier.Button5.getTouch()) {
     Serial.println("Touching Button 5");
   }
   delay(20);

examples/TouchPads/Touch_and_LEDs/Touch_and_LEDs.ino

@@ -22,7 +22,7 @@ void loop() {
 
   //Different types of touches
   //When you first touch it
-  if (carrier.Button0.onTouchDown()) {
+  if (carrier.Button1.onTouchDown()) {
     Serial.println("Touched Down Button 1");
     carrier.leds.setPixelColor(0, 20, 20, 20);   // 'Off' pixel at tail
     carrier.leds.show();                     // Refresh strip
@@ -33,7 +33,7 @@ void loop() {
   }
 
   //When you release it
-  if (carrier.Button1.onTouchUp()) {
+  if (carrier.Button2.onTouchUp()) {
     Serial.println("Release Touch Button 2");
     carrier.leds.setPixelColor(1, 20, 20, 20);   // 'Off' pixel at tail
     carrier.leds.show();                     // Refresh strip
@@ -44,7 +44,7 @@ void loop() {
   }
 
   //When it detects a change, down or up
-  if (carrier.Button2.onTouchChange()) {
+  if (carrier.Button3.onTouchChange()) {
     Serial.println("Changed Touch Button 3");
     carrier.leds.setPixelColor(2, 20, 20, 20);   // 'Off' pixel at tail
     carrier.leds.show();                     // Refresh strip
@@ -55,7 +55,7 @@ void loop() {
   }
 
   //Normal, if it is being pressed
-  if (carrier.Button3.getTouch()) {
+  if (carrier.Button4.getTouch()) {
     Serial.println("Touching Button 4");
     carrier.leds.setPixelColor(3, 20, 20, 20);   // 'Off' pixel at tail
     carrier.leds.show();                     // Refresh strip
@@ -65,7 +65,7 @@ void loop() {
     carrier.leds.show();                     // Refresh strip
   }
 
-  if (carrier.Button4.getTouch()) {
+  if (carrier.Button5.getTouch()) {
     Serial.println("Touching Button 5");
     carrier.leds.setPixelColor(4, 20, 20, 20);   // 'Off' pixel at tail
     carrier.leds.show();                     // Refresh strip

examples/TouchPads/getTouch/getTouch.ino

@@ -31,19 +31,19 @@ void loop() {
   carrier.Buttons.update();
 
   // Checks if new data are available
-  if (carrier.Button0.getTouch()) {
+  if (carrier.Button1.getTouch()) {
     Serial.println("Touching Button 1");
   }
-  if (carrier.Button1.getTouch()) {
+  if (carrier.Button2.getTouch()) {
     Serial.println("Touching Button 2");
   }
-  if (carrier.Button2.getTouch()) {
+  if (carrier.Button3.getTouch()) {
     Serial.println("Touching Button 3");
   }
-  if (carrier.Button3.getTouch()) {
+  if (carrier.Button4.getTouch()) {
     Serial.println("Touching Button 4");
   }
-  if (carrier.Button4.getTouch()) {
+  if (carrier.Button5.getTouch()) {
     Serial.println("Touching Button 5");
   }