WiFiAdvancedCallback.ino

/*
  ArduinoMqttClient - WiFi Advanced Callback

  This example connects to a MQTT broker and subscribes to a single topic,
  it also publishes a message to another topic every 10 seconds.
  When a message is received it prints the message to the Serial Monitor,
  it uses the callback functionality of the library.

  It also demonstrates how to set the will message, get/set QoS, 
  duplicate and retain values of messages.

  The circuit:
  - Arduino MKR 1000, MKR 1010 or Uno WiFi Rev2 board

  This example code is in the public domain.
*/

#include <ArduinoMqttClient.h>
#if defined(ARDUINO_SAMD_MKRWIFI1010) || defined(ARDUINO_SAMD_NANO_33_IOT) || defined(ARDUINO_AVR_UNO_WIFI_REV2)
  #include <WiFiNINA.h>
#elif defined(ARDUINO_SAMD_MKR1000)
  #include <WiFi101.h>
#elif defined(ARDUINO_ARCH_ESP8266)
  #include <ESP8266WiFi.h>
#endif

#include "arduino_secrets.h"
///////please enter your sensitive data in the Secret tab/arduino_secrets.h
char ssid[] = SECRET_SSID;    // your network SSID (name)
char pass[] = SECRET_PASS;    // your network password (use for WPA, or use as key for WEP)

// To connect with SSL/TLS:
// 1) Change WiFiClient to WiFiSSLClient.
// 2) Change port value from 1883 to 8883.
// 3) Change broker value to a server with a known SSL/TLS root certificate 
//    flashed in the WiFi module.

WiFiClient wifiClient;
MqttClient mqttClient(wifiClient);

const char broker[]    = "test.mosquitto.org";
int        port        = 1883;
const char willTopic[] = "arduino/will";
const char inTopic[]   = "arduino/in";
const char outTopic[]  = "arduino/out";

const long interval = 10000;
unsigned long previousMillis = 0;

int count = 0;

void setup() {
  //Initialize serial and wait for port to open:
  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for native USB port only
  }

  // attempt to connect to WiFi network:
  Serial.print("Attempting to connect to WPA SSID: ");
  Serial.println(ssid);
  while (WiFi.begin(ssid, pass) != WL_CONNECTED) {
    // failed, retry
    Serial.print(".");
    delay(5000);
  }

  Serial.println("You're connected to the network");
  Serial.println();

  // You can provide a unique client ID, if not set the library uses Arduino-millis()
  // Each client must have a unique client ID
  // mqttClient.setId("clientId");

  // You can provide a username and password for authentication
  // mqttClient.setUsernamePassword("username", "password");

  // By default the library connects with the "clean session" flag set,
  // you can disable this behaviour by using
  // mqttClient.setCleanSession(false);

  // set a will message, used by the broker when the connection dies unexpectedly
  // you must know the size of the message beforehand, and it must be set before connecting
  String willPayload = "oh no!";
  bool willRetain = true;
  int willQos = 1;

  mqttClient.beginWill(willTopic, willPayload.length(), willRetain, willQos);
  mqttClient.print(willPayload);
  mqttClient.endWill();

  Serial.print("Attempting to connect to the MQTT broker: ");
  Serial.println(broker);

  if (!mqttClient.connect(broker, port)) {
    Serial.print("MQTT connection failed! Error code = ");
    Serial.println(mqttClient.connectError());

    while (1);
  }

  Serial.println("You're connected to the MQTT broker!");
  Serial.println();

  // set the message receive callback
  mqttClient.onMessage(onMqttMessage);

  Serial.print("Subscribing to topic: ");
  Serial.println(inTopic);
  Serial.println();

  // subscribe to a topic
  // the second parameter sets the QoS of the subscription,
  // the the library supports subscribing at QoS 0, 1, or 2
  int subscribeQos = 1;

  mqttClient.subscribe(inTopic, subscribeQos);

  // topics can be unsubscribed using:
  // mqttClient.unsubscribe(inTopic);

  Serial.print("Waiting for messages on topic: ");
  Serial.println(inTopic);
  Serial.println();
}

void loop() {
  // call poll() regularly to allow the library to receive MQTT messages and
  // send MQTT keep alives which avoids being disconnected by the broker
  mqttClient.poll();

  // to avoid having delays in loop, we'll use the strategy from BlinkWithoutDelay
  // see: File -> Examples -> 02.Digital -> BlinkWithoutDelay for more info
  unsigned long currentMillis = millis();

  if (currentMillis - previousMillis >= interval) {
    // save the last time a message was sent
    previousMillis = currentMillis;

    String payload;

    payload += "hello world!";
    payload += " ";
    payload += count;

    Serial.print("Sending message to topic: ");
    Serial.println(outTopic);
    Serial.println(payload);

    // send message, the Print interface can be used to set the message contents
    // in this case we know the size ahead of time, so the message payload can be streamed

    bool retained = false;
    int qos = 1;
    bool dup = false;

    mqttClient.beginMessage(outTopic, payload.length(), retained, qos, dup);
    mqttClient.print(payload);
    mqttClient.endMessage();

    Serial.println();

    count++;
  }
}

void onMqttMessage(int messageSize) {
  // we received a message, print out the topic and contents
  Serial.print("Received a message with topic '");
  Serial.print(mqttClient.messageTopic());
  Serial.print("', duplicate = ");
  Serial.print(mqttClient.messageDup() ? "true" : "false");
  Serial.print(", QoS = ");
  Serial.print(mqttClient.messageQoS());
  Serial.print(", retained = ");
  Serial.print(mqttClient.messageRetain() ? "true" : "false");
  Serial.print("', length ");
  Serial.print(messageSize);
  Serial.println(" bytes:");

  // use the Stream interface to print the contents
  while (mqttClient.available()) {
    Serial.print((char)mqttClient.read());
  }
  Serial.println();

  Serial.println();
}