diff --git a/.travis.yml b/.travis.yml
index 10e2cf9da..858ecb162 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -30,5 +30,13 @@ install:
 script:
   - buildExampleSketch ArduinoIoTCloud_LED_switch
   - buildExampleSketch ArduinoIoTCloud_Travis_CI
+  - |
+    if [ "$BOARD" == "arduino:samd:mkr1000" ] || [ "$BOARD" == "arduino:samd:mkrwifi1010" ];
+    then buildExampleSketch WiFi_Cloud_Blink;
+    fi
+  - |
+    if [ "$BOARD" == "arduino:samd:mkrgsm1400" ];
+    then buildExampleSketch GSM_Cloud_Blink;
+    fi
   - buildExampleUtilitySketch Provisioning
 
diff --git a/examples/GSM_Cloud_Blink/GSM_Cloud_Blink.ino b/examples/GSM_Cloud_Blink/GSM_Cloud_Blink.ino
new file mode 100644
index 000000000..95fe61f54
--- /dev/null
+++ b/examples/GSM_Cloud_Blink/GSM_Cloud_Blink.ino
@@ -0,0 +1,87 @@
+#include <ArduinoIoTCloud.h>
+#include <ConnectionManager.h>
+#include <GSMConnectionManager.h>
+
+#ifndef SECRET_PIN
+  #define SECRET_PIN ""
+  #warning "You need to define SECRET_PIN in tab/arduino_secrets.h"
+#endif
+
+#ifndef SECRET_APN
+  #define SECRET_APN ""
+  #warning "You need to define SECRET_PIN in tab/arduino_secrets.h"
+#endif
+
+#ifndef SECRET_USER_NAME
+  #define SECRET_USER_NAME ""
+  #warning "You need to define SECRET_USER_NAME in tab/arduino_secrets.h"
+#endif
+
+#ifndef SECRET_PASSWORD
+  #define SECRET_PASSWORD ""
+  #warning "You need to define SECRET_PASSWORD in tab/arduino_secrets.h"
+#endif
+
+String cloudSerialBuffer = ""; // the string used to compose network messages from the received characters
+// handles connection to the network
+ConnectionManager * ArduinoIoTPreferredConnection = new GSMConnectionManager(SECRET_PIN, SECRET_APN, SECRET_USER_NAME, SECRET_PASSWORD);
+
+void setup() {
+  setDebugMessageLevel(3); // used to set a level of granularity in information output [0...4]
+  Serial.begin(9600);
+  while (!Serial); // waits for the serial to become available
+  ArduinoCloud.begin(ArduinoIoTPreferredConnection); // initialize a connection to the Arduino IoT Cloud
+  pinMode(LED_BUILTIN, OUTPUT);
+}
+
+void loop() {
+  ArduinoCloud.update();
+  // check if there is something waiting to be read
+  if (ArduinoCloud.connected()) {
+    if (CloudSerial.available()) {
+      char character = CloudSerial.read();
+      cloudSerialBuffer += character;
+      // if a \n character has been received, there should be a complete command inside cloudSerialBuffer
+      if (character == '\n') {
+        handleString();
+      }
+    } else { // if there is nothing to read, it could be that the last command didn't end with a '\n'. Check.
+      handleString();
+    }
+    // Just to be able to simulate the board responses through the serial monitor
+    if (Serial.available()) {
+      CloudSerial.write(Serial.read());
+    }
+  }
+}
+void handleString() {
+  // Don't proceed if the string is empty
+  if (cloudSerialBuffer.equals("")) {
+    return;
+  }
+  // Remove leading and trailing whitespaces
+  cloudSerialBuffer.trim();
+  // Make it uppercase;
+  cloudSerialBuffer.toUpperCase();
+  if (cloudSerialBuffer.equals("ON")) {
+    digitalWrite(LED_BUILTIN, HIGH);
+  } else if (cloudSerialBuffer.equals("OFF")) {
+    digitalWrite(LED_BUILTIN, LOW);
+  }
+  sendString(cloudSerialBuffer);
+  // Reset cloudSerialBuffer
+  cloudSerialBuffer = "";
+}
+// sendString sends a string to the Arduino Cloud.
+void sendString(String stringToSend) {
+  // send the characters one at a time
+  char lastSentChar = 0;
+  for (int i = 0; i < stringToSend.length(); i++) {
+    lastSentChar = stringToSend.charAt(i);
+    CloudSerial.write(lastSentChar);
+  }
+  // if the last sent character wasn't a '\n' add it
+  if (lastSentChar != '\n') {
+    CloudSerial.write('\n');
+  }
+}
\ No newline at end of file
diff --git a/examples/WiFi_Cloud_Blink/WiFi_Cloud_Blink.ino b/examples/WiFi_Cloud_Blink/WiFi_Cloud_Blink.ino
new file mode 100644
index 000000000..d73f62d2a
--- /dev/null
+++ b/examples/WiFi_Cloud_Blink/WiFi_Cloud_Blink.ino
@@ -0,0 +1,77 @@
+#include <ArduinoIoTCloud.h>
+#include <ConnectionManager.h>
+#include <WiFiConnectionManager.h>
+
+#ifndef SECRET_WIFI_NAME
+  #define SECRET_WIFI_NAME ""
+  #warning "You need to define SECRET_WIFI_NAME in tab/arduino_secrets.h"
+#endif
+
+#ifndef SECRET_PASSWORD
+  #define SECRET_PASSWORD ""
+  #warning "You need to define SECRET_PASSWORD in tab/arduino_secrets.h"
+#endif
+
+String cloudSerialBuffer = ""; // the string used to compose network messages from the received characters
+// handles connection to the network
+ConnectionManager * ArduinoIoTPreferredConnection = new WiFiConnectionManager(SECRET_WIFI_NAME, SECRET_PASSWORD);
+
+void setup() {
+  setDebugMessageLevel(3); // used to set a level of granularity in information output [0...4]
+  Serial.begin(9600);
+  while (!Serial); // waits for the serial to become available
+  ArduinoCloud.begin(ArduinoIoTPreferredConnection); // initialize a connection to the Arduino IoT Cloud
+  pinMode(LED_BUILTIN, OUTPUT);
+}
+
+void loop() {
+  ArduinoCloud.update();
+  // check if there is something waiting to be read
+  if (ArduinoCloud.connected()) {
+    if (CloudSerial.available()) {
+      char character = CloudSerial.read();
+      cloudSerialBuffer += character;
+      // if a \n character has been received, there should be a complete command inside cloudSerialBuffer
+      if (character == '\n') {
+        handleString();
+      }
+    } else { // if there is nothing to read, it could be that the last command didn't end with a '\n'. Check.
+      handleString();
+    }
+    // Just to be able to simulate the board responses through the serial monitor
+    if (Serial.available()) {
+      CloudSerial.write(Serial.read());
+    }
+  }
+}
+void handleString() {
+  // Don't proceed if the string is empty
+  if (cloudSerialBuffer.equals("")) {
+    return;
+  }
+  // Remove leading and trailing whitespaces
+  cloudSerialBuffer.trim();
+  // Make it uppercase;
+  cloudSerialBuffer.toUpperCase();
+  if (cloudSerialBuffer.equals("ON")) {
+    digitalWrite(LED_BUILTIN, HIGH);
+  } else if (cloudSerialBuffer.equals("OFF")) {
+    digitalWrite(LED_BUILTIN, LOW);
+  }
+  sendString(cloudSerialBuffer);
+  // Reset cloudSerialBuffer
+  cloudSerialBuffer = "";
+}
+// sendString sends a string to the Arduino Cloud.
+void sendString(String stringToSend) {
+  // send the characters one at a time
+  char lastSentChar = 0;
+  for (int i = 0; i < stringToSend.length(); i++) {
+    lastSentChar = stringToSend.charAt(i);
+    CloudSerial.write(lastSentChar);
+  }
+  // if the last sent character wasn't a '\n' add it
+  if (lastSentChar != '\n') {
+    CloudSerial.write('\n');
+  }
+}