Merge pull request #498 from adafruit/update-tinyusb-1cfc88dbcb8cff6f926aef02c5609880169ec94c

Update tinyusb to commit 334ac8072650e3b18278042c2c2b402db73c7359

Author: hathach

README.md

@@ -38,7 +38,9 @@ Following core has TinyUSB as either the primary usb stack or selectable via men
 - [adafruit/Adafruit_nRF52_Arduino](https://github.com/adafruit/Adafruit_nRF52_Arduino)
 - [adafruit/ArduinoCore-samd](https://github.com/adafruit/ArduinoCore-samd)
 - [earlephilhower/arduino-pico](https://github.com/earlephilhower/arduino-pico)
-- [espressif/arduino-esp32](https://github.com/espressif/arduino-esp32)
+- [espressif/arduino-esp32](https://github.com/espressif/arduino-esp32) additional Tools menu is needed 
+    - `USB Mode=USB-OTG (TinyUSB)` for S3 and P4
+    - `USB CDC On Boot=Enabled`, `USB Firmware MSC On Boot=Disabled`, `USB DFU On Boot=Disabled`
 - [openwch/arduino_core_ch32](https://github.com/openwch/arduino_core_ch32)
 
 Note: For ESP32 port, version before v3.0 requires all descriptors must be specified in usb objects declaration i.e constructors. Therefore all descriptor-related fields must be part of object declaration and descriptor-related API have no effect afterwards. This limitation is not the case for version from v3.0. 

examples/DualRole/MassStorage/msc_data_logger/msc_data_logger.ino

@@ -38,7 +38,7 @@
 #endif
 
 // SdFat is required for using Adafruit_USBH_MSC_SdFatDevice
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // USBHost is defined in usbh_helper.h
 #include "usbh_helper.h"

examples/DualRole/MassStorage/msc_file_explorer/msc_file_explorer.ino

@@ -27,7 +27,7 @@
  */
 
 // SdFat is required for using Adafruit_USBH_MSC_SdFatDevice
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 // USBHost is defined in usbh_helper.h
 #include "usbh_helper.h"

examples/MassStorage/msc_esp32_file_browser/msc_esp32_file_browser.ino

@@ -32,7 +32,7 @@
  */
 
 #include "SPI.h"
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 #include "Adafruit_SPIFlash.h"
 #include "Adafruit_TinyUSB.h"
 

examples/MassStorage/msc_external_flash/msc_external_flash.ino

@@ -23,7 +23,7 @@
  */
 
 #include "SPI.h"
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 #include "Adafruit_SPIFlash.h"
 #include "Adafruit_TinyUSB.h"
 

examples/MassStorage/msc_external_flash_sdcard/msc_external_flash_sdcard.ino

@@ -23,7 +23,7 @@
  */
 
 #include "SPI.h"
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 #include "Adafruit_SPIFlash.h"
 #include "Adafruit_TinyUSB.h"
 

examples/MassStorage/msc_internal_flash_samd/msc_internal_flash_samd.ino

@@ -10,7 +10,7 @@
 *********************************************************************/
 
 #include "SPI.h"
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 #include "Adafruit_InternalFlash.h"
 #include "Adafruit_TinyUSB.h"
 

examples/MassStorage/msc_sdfat/msc_sdfat.ino

@@ -14,7 +14,7 @@
  */
 
 #include "SPI.h"
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 #include "Adafruit_TinyUSB.h"
 
 const int chipSelect = 10;

src/Adafruit_TinyUSB.h

@@ -25,11 +25,6 @@
 #ifndef ADAFRUIT_TINYUSB_H_
 #define ADAFRUIT_TINYUSB_H_
 
-// ESP32 out-of-sync
-#ifdef ARDUINO_ARCH_ESP32
-#include "arduino/ports/esp32/tusb_config_esp32.h"
-#endif
-
 #include "tusb_option.h"
 
 // Device

src/arduino/Adafruit_TinyUSB_API.cpp

@@ -31,6 +31,8 @@
 
 extern "C" {
 
+uint32_t tusb_time_millis_api(void) { return millis(); }
+
 //--------------------------------------------------------------------+
 // Device
 //--------------------------------------------------------------------+

src/arduino/msc/Adafruit_USBH_MSC.cpp

@@ -34,7 +34,7 @@
 #include "Adafruit_USBH_MSC.h"
 #include "tusb.h"
 
-#if __has_include("SdFat.h")
+#if __has_include("SdFat_Adafruit_Fork.h")
 
 Adafruit_USBH_MSC_BlockDevice::Adafruit_USBH_MSC_BlockDevice() {
   _daddr = _lun = 0;

src/arduino/msc/Adafruit_USBH_MSC.h

@@ -28,9 +28,9 @@
 #include "tusb.h"
 
 // define SdFat host helper class if SdFat library is available
-#if __has_include("SdFat.h")
+#if __has_include("SdFat_Adafruit_Fork.h")
 
-#include "SdFat.h"
+#include "SdFat_Adafruit_Fork.h"
 
 class Adafruit_USBH_MSC_BlockDevice : public FsBlockDeviceInterface {
 public:

src/arduino/ports/esp32/tusb_config_esp32.h

@@ -38,17 +38,42 @@ extern "C" {
 // libraries, this file is used to make it compatible with ESP32 Arduino core.
 
 // This file also contains additional configuration for EPS32 in addition to
-// tools/sdk/esp32xx/include/arduino_tinyusb/include/tusb_config.h
+// tools/esp32-arduino-libs/esp32xx/include/arduino_tinyusb/include/tusb_config.h
 
 //--------------------------------------------------------------------+
 // ESP32 out-of-sync
 //--------------------------------------------------------------------+
 #include "esp_arduino_version.h"
+#include "sdkconfig.h"
 
 #if ESP_ARDUINO_VERSION < ESP_ARDUINO_VERSION_VAL(2, 0, 8)
 #error "ESP32 Arduino core version 2.0.8 or later is required"
 #endif
 
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+// Note: it is possible to use tinyusb + max3421e as host controller
+// with no OTG USB MCU such as eps32, c3 etc...
+//--------------------------------------------------------------------
+
+#if CONFIG_IDF_TARGET_ESP32S2
+#define CFG_TUSB_MCU OPT_MCU_ESP32S2
+#elif CONFIG_IDF_TARGET_ESP32S3
+#define CFG_TUSB_MCU OPT_MCU_ESP32S3
+#elif CONFIG_IDF_TARGET_ESP32P4
+#define CFG_TUSB_MCU OPT_MCU_ESP32P4
+#else
+#define CFG_TUSB_MCU OPT_MCU_ESP32
+#endif
+
+#if CONFIG_IDF_TARGET_ESP32P4
+#define CFG_TUD_MAX_SPEED OPT_MODE_HIGH_SPEED
+#define CFG_TUH_MAX_SPEED OPT_MODE_HIGH_SPEED
+#else
+#define CFG_TUD_MAX_SPEED OPT_MODE_FULL_SPEED
+#define CFG_TUH_MAX_SPEED OPT_MODE_FULL_SPEED
+#endif
+
 #ifndef CFG_TUSB_OS
 #define CFG_TUSB_OS OPT_OS_FREERTOS
 // clang-format off
@@ -64,33 +89,57 @@ extern "C" {
 #define CFG_TUH_LOG_LEVEL 2
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-// Note: it is possible to use tinyusb + max3421e as host controller
-// with no OTG USB MCU such as eps32, c3 etc...
-//--------------------------------------------------------------------
-
 #ifndef CFG_TUSB_DEBUG
 #define CFG_TUSB_DEBUG 0
 #endif
 
 // For selectively disable device log (when > CFG_TUSB_DEBUG)
 // #define CFG_TUD_LOG_LEVEL 3
 
+#define CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_ALIGN TU_ATTR_ALIGNED(4)
+
 //--------------------------------------------------------------------
 // DEVICE CONFIGURATION
 //--------------------------------------------------------------------
+#define CFG_TUD_ENABLED 1
+
+#define CFG_TUD_CDC 2
+#define CFG_TUD_MSC 1
+#define CFG_TUD_HID 2
+#define CFG_TUD_MIDI 1
+#define CFG_TUD_VENDOR 1
+#define CFG_TUD_VIDEO 1
+#define CFG_TUD_VIDEO_STREAMING 1
 
-// device configuration is configured in BSP
-// sdk/include/arduino_tinyusb/include/tusb_config.h
+// video streaming endpoint buffer size
+#define CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE                                     \
+  CONFIG_TINYUSB_VIDEO_STREAMING_BUFSIZE
+
+// CDC FIFO size of TX and RX
+#define CFG_TUD_CDC_RX_BUFSIZE CONFIG_TINYUSB_CDC_RX_BUFSIZE
+#define CFG_TUD_CDC_TX_BUFSIZE CONFIG_TINYUSB_CDC_TX_BUFSIZE
+
+// MSC Buffer size of Device Mass storage
+#define CFG_TUD_MSC_EP_BUFSIZE CONFIG_TINYUSB_MSC_BUFSIZE
+
+// HID buffer size Should be sufficient to hold ID (if any) + Data
+#define CFG_TUD_HID_BUFSIZE CONFIG_TINYUSB_HID_BUFSIZE
+
+// MIDI FIFO size of TX and RX
+#define CFG_TUD_MIDI_RX_BUFSIZE CONFIG_TINYUSB_MIDI_RX_BUFSIZE
+#define CFG_TUD_MIDI_TX_BUFSIZE CONFIG_TINYUSB_MIDI_TX_BUFSIZE
+
+// Vendor FIFO size of TX and RX
+#define CFG_TUD_VENDOR_RX_BUFSIZE CONFIG_TINYUSB_VENDOR_RX_BUFSIZE
+#define CFG_TUD_VENDOR_TX_BUFSIZE CONFIG_TINYUSB_VENDOR_TX_BUFSIZE
 
 //--------------------------------------------------------------------
 // Host Configuration
 //--------------------------------------------------------------------
 
 // Enable host stack with MAX3421E (host shield)
 #define CFG_TUH_ENABLED 1
-#define CFG_TUH_MAX_SPEED OPT_MODE_FULL_SPEED
 #define CFG_TUH_MAX3421 1
 
 #ifndef CFG_TUH_MAX3421_ENDPOINT_TOTAL

src/arduino/ports/rp2040/tusb_config_rp2040.h

@@ -117,8 +117,8 @@ extern "C" {
 #define CFG_TUD_HID_EP_BUFSIZE 64
 
 // MIDI FIFO size of TX and RX
-#define CFG_TUD_MIDI_RX_BUFSIZE 128
-#define CFG_TUD_MIDI_TX_BUFSIZE 128
+#define CFG_TUD_MIDI_RX_BUFSIZE 64
+#define CFG_TUD_MIDI_TX_BUFSIZE 64
 
 // Vendor FIFO size of TX and RX
 #define CFG_TUD_VENDOR_RX_BUFSIZE 64