diff --git a/adafruit_tcs34725.py b/adafruit_tcs34725.py
index c875b81..e4e379f 100644
--- a/adafruit_tcs34725.py
+++ b/adafruit_tcs34725.py
@@ -6,9 +6,11 @@
 `adafruit_tcs34725`
 ====================================================
 
-CircuitPython module for the TCS34725 color sensor.  Ported from the
-micropython-adafruit-tcs34725 module by Radomir Dopieralski:
-https://github.com/adafruit/micropython-adafruit-tcs34725
+CircuitPython module for the TCS34725 color sensor.
+Ported from the
+`micropython-adafruit-tcs34725 <https://github.com/adafruit/micropython-adafruit-tcs34725>`_
+module by Radomir Dopieralski
+
 
 See examples/tcs34725_simpletest.py for an example of the usage.
 
@@ -27,8 +29,9 @@
 
 **Software and Dependencies:**
 
-* Adafruit CircuitPython firmware for the ESP8622 and M0-based boards:
-  https://github.com/adafruit/circuitpython/releases
+* Adafruit CircuitPython firmware for the supported boards:
+  https://circuitpython.org/downloads
+
 * Adafruit's Bus Device library: https://github.com/adafruit/Adafruit_CircuitPython_BusDevice
 """
 import time
@@ -65,7 +68,39 @@
 
 
 class TCS34725:
-    """Driver for the TCS34725 color sensor."""
+    """Driver for the TCS34725 color sensor.
+
+    :param ~busio.I2C i2c: The I2C bus the device is connected to
+    :param int address: The I2C device address. Defaults to :const:`0x29`
+
+
+    **Quickstart: Importing and using the device**
+
+        Here is an example of using the :class:`TCS34725`.
+        First you will need to import the libraries to use the sensor
+
+        .. code-block:: python
+
+            import board
+            import adafruit_tcs34725
+
+        Once this is done you can define your `board.I2C` object and define your sensor object
+
+        .. code-block:: python
+
+            i2c = board.I2C()  # uses board.SCL and board.SDA
+            sensor = adafruit_tcs34725.TCS34725(i2c)
+
+
+        Now you have access to the :attr:`color_temperature`, :attr:`lux` attributes
+
+        .. code-block:: python
+
+            temp = sensor.color_temperature
+            lux = sensor.lux
+
+
+    """
 
     # Class-level buffer for reading and writing data with the sensor.
     # This reduces memory allocations but means the code is not re-entrant or
@@ -318,7 +353,7 @@ def _temperature_and_lux_dn40(self):
     def glass_attenuation(self):
         """The Glass Attenuation (FA) factor used to compensate for lower light
         levels at the device due to the possible presence of glass. The GA is
-        the inverse of the glass transmissivity (T), so GA = 1/T. A transmissivity
+        the inverse of the glass transmissivity (T), so :math:`GA = 1/T`. A transmissivity
         of 50% gives GA = 1 / 0.50 = 2. If no glass is present, use GA = 1.
         See Application Note: DN40-Rev 1.0 – Lux and CCT Calculations using
         ams Color Sensors for more details.
diff --git a/docs/index.rst b/docs/index.rst
index e5418c3..c2e9bd0 100644
--- a/docs/index.rst
+++ b/docs/index.rst
@@ -23,6 +23,8 @@ Table of Contents
 .. toctree::
     :caption: Tutorials
 
+    Adafruit Color Sensors <https://learn.adafruit.com/adafruit-color-sensors/overview>
+
 .. toctree::
     :caption: Related Products
 
diff --git a/examples/tcs34725_simpletest.py b/examples/tcs34725_simpletest.py
index e174220..3823499 100644
--- a/examples/tcs34725_simpletest.py
+++ b/examples/tcs34725_simpletest.py
@@ -4,15 +4,12 @@
 # Simple demo of the TCS34725 color sensor.
 # Will detect the color from the sensor and print it out every second.
 import time
-
 import board
-import busio
-
 import adafruit_tcs34725
 
 
-# Initialize I2C bus and sensor.
-i2c = busio.I2C(board.SCL, board.SDA)
+# Create sensor object, communicating over the board's default I2C bus
+i2c = board.I2C()  # uses board.SCL and board.SDA
 sensor = adafruit_tcs34725.TCS34725(i2c)
 
 # Main loop reading color and printing it every second.