diff --git a/.gitignore b/.gitignore
index 31d9b4c..7bece34 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,4 +1,7 @@
 .DS_Store
+__pycache__
+_build
+*.pyc
 .env
 build*
 bundles
diff --git a/.pylintrc b/.pylintrc
index 946d694..81d8170 100644
--- a/.pylintrc
+++ b/.pylintrc
@@ -119,7 +119,8 @@ spelling-store-unknown-words=no
 [MISCELLANEOUS]
 
 # List of note tags to take in consideration, separated by a comma.
-notes=FIXME,XXX,TODO
+# notes=FIXME,XXX,TODO
+notes=FIXME,XXX
 
 
 [TYPECHECK]
diff --git a/CODE_OF_CONDUCT.md b/CODE_OF_CONDUCT.md
new file mode 100644
index 0000000..1617586
--- /dev/null
+++ b/CODE_OF_CONDUCT.md
@@ -0,0 +1,74 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+In the interest of fostering an open and welcoming environment, we as
+contributors and maintainers pledge to making participation in our project and
+our community a harassment-free experience for everyone, regardless of age, body
+size, disability, ethnicity, gender identity and expression, level of experience,
+nationality, personal appearance, race, religion, or sexual identity and
+orientation.
+
+## Our Standards
+
+Examples of behavior that contributes to creating a positive environment
+include:
+
+* Using welcoming and inclusive language
+* Being respectful of differing viewpoints and experiences
+* Gracefully accepting constructive criticism
+* Focusing on what is best for the community
+* Showing empathy towards other community members
+
+Examples of unacceptable behavior by participants include:
+
+* The use of sexualized language or imagery and unwelcome sexual attention or
+advances
+* Trolling, insulting/derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or electronic
+  address, without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Our Responsibilities
+
+Project maintainers are responsible for clarifying the standards of acceptable
+behavior and are expected to take appropriate and fair corrective action in
+response to any instances of unacceptable behavior.
+
+Project maintainers have the right and responsibility to remove, edit, or
+reject comments, commits, code, wiki edits, issues, and other contributions
+that are not aligned to this Code of Conduct, or to ban temporarily or
+permanently any contributor for other behaviors that they deem inappropriate,
+threatening, offensive, or harmful.
+
+## Scope
+
+This Code of Conduct applies both within project spaces and in public spaces
+when an individual is representing the project or its community. Examples of
+representing a project or community include using an official project e-mail
+address, posting via an official social media account, or acting as an appointed
+representative at an online or offline event. Representation of a project may be
+further defined and clarified by project maintainers.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported by contacting the project team at support@adafruit.com. All
+complaints will be reviewed and investigated and will result in a response that
+is deemed necessary and appropriate to the circumstances. The project team is
+obligated to maintain confidentiality with regard to the reporter of an incident.
+Further details of specific enforcement policies may be posted separately.
+
+Project maintainers who do not follow or enforce the Code of Conduct in good
+faith may face temporary or permanent repercussions as determined by other
+members of the project's leadership.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4,
+available at [http://contributor-covenant.org/version/1/4][version]
+
+[homepage]: http://contributor-covenant.org
+[version]: http://contributor-covenant.org/version/1/4/
diff --git a/LICENSE b/LICENSE
index 9fd8ebb..effeb70 100644
--- a/LICENSE
+++ b/LICENSE
@@ -1,6 +1,6 @@
 The MIT License (MIT)
 
-Copyright (c) 2016 Radomir Dopieralski and Adafruit Industries
+Copyright (c) 2017 Radomir Dopieralski and Adafruit Industries
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
diff --git a/README.rst b/README.rst
index 47cc81c..e37e517 100644
--- a/README.rst
+++ b/README.rst
@@ -1,5 +1,13 @@
-Display drivers for Adafruit CircuitPython.
-=========================================
+Introduction
+============
+
+.. image:: https://readthedocs.org/projects/adafruit-circuitpython-rgb_display/badge/?version=latest
+    :target: https://circuitpython.readthedocs.io/projects/rgb_display/en/latest/
+    :alt: Documentation Status
+
+.. image :: https://img.shields.io/discord/327254708534116352.svg
+    :target: https://discord.gg/nBQh6qu
+    :alt: Discord
 
 Port of display drivers from https://github.com/adafruit/micropython-adafruit-rgb-display
 to Adafruit CircuitPython for use on Adafruit's SAMD21-based and other CircuitPython
@@ -10,3 +18,89 @@ board too: https://github.com/adafruit/Adafruit_MicroPython_BusDevice
 
 Note that this driver currently won't work on micropython.org firmware, instead
 you want the micropython-adafruit-rgb-display driver linked above!
+
+Dependencies
+=============
+This driver depends on:
+
+* `Adafruit CircuitPython <https://github.com/adafruit/circuitpython>`_
+
+Please ensure all dependencies are available on the CircuitPython filesystem.
+This is easily achieved by downloading
+`the Adafruit library and driver bundle <https://github.com/adafruit/Adafruit_CircuitPython_Bundle>`_.
+
+Usage Example
+=============
+
+.. code-block:: python
+
+  import busio
+  import digitalio
+  from board import SCK, MOSI, MISO, D2, D2
+
+  from adafruit_rgb_display import color565
+  import adafruit_rgb_display.ili9341 as ili9341
+
+
+  # Configuration for CS and DC pins:
+  CS_PIN = D2
+  DC_PIN = D3
+
+  # Setup SPI bus using hardware SPI:
+  spi = busio.SPI(clock=SCK, MOSI=MOSI, MISO=MISO)
+
+  # Create the ILI9341 display:
+  display = ili9341.ILI9341(spi, cs=digitalio.DigitalInOut(CS_PIN),
+                            dc=digitalio.DigitalInOut(DC_PIN))
+
+  # Main loop:
+  while True:
+      # Clear the display
+      display.fill(0)
+      # Draw a red pixel in the center.
+      display.pixel(120, 160, color565(255, 0, 0))
+      # Pause 2 seconds.
+      time.sleep(2)
+      # Clear the screen blue.
+      display.fill(color565(0, 0, 255))
+      # Pause 2 seconds.
+  time.sleep(2)
+
+API Reference
+=============
+
+.. toctree::
+   :maxdepth: 2
+
+   api
+
+Contributing
+============
+
+Contributions are welcome! Please read our `Code of Conduct
+<https://github.com/adafruit/Adafruit_CircuitPython_RGB_Display/blob/master/CODE_OF_CONDUCT.md>`_
+before contributing to help this project stay welcoming.
+
+Building locally
+================
+
+To build this library locally you'll need to install the
+`circuitpython-build-tools <https://github.com/adafruit/circuitpython-build-tools>`_ package.
+
+.. code-block:: shell
+
+    python3 -m venv .env
+    source .env/bin/activate
+    pip install circuitpython-build-tools
+
+Once installed, make sure you are in the virtual environment:
+
+.. code-block:: shell
+
+    source .env/bin/activate
+
+Then run the build:
+
+.. code-block:: shell
+
+    circuitpython-build-bundles --filename_prefix adafruit-circuitpython-rgb_display --library_location .
diff --git a/adafruit_rgb_display/hx8353.py b/adafruit_rgb_display/hx8353.py
index 1ad96d8..c6e6e69 100644
--- a/adafruit_rgb_display/hx8353.py
+++ b/adafruit_rgb_display/hx8353.py
@@ -1,4 +1,32 @@
-"""A simple driver for the HX8353-based displays."""
+# The MIT License (MIT)
+#
+# Copyright (c) 2017 Radomir Dopieralski and Adafruit Industries
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+"""
+`adafruit_RGB_Display.hx8353`
+====================================================
+
+A simple driver for the HX8353-based displays.
+
+* Author(s): Radomir Dopieralski, Michael McWethy
+"""
 from adafruit_rgb_display.rgb import DisplaySPI
 from micropython import const
 
diff --git a/adafruit_rgb_display/ili9341.py b/adafruit_rgb_display/ili9341.py
index 84af160..c647fb7 100644
--- a/adafruit_rgb_display/ili9341.py
+++ b/adafruit_rgb_display/ili9341.py
@@ -1,4 +1,32 @@
-"""A simple driver for the ILI9341/ILI9340-based displays."""
+# The MIT License (MIT)
+#
+# Copyright (c) 2017 Radomir Dopieralski and Adafruit Industries
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+"""
+`adafruit_RGB_Display.ili9341`
+====================================================
+
+A simple driver for the ILI9341/ILI9340-based displays.
+
+* Author(s): Radomir Dopieralski, Michael McWethy
+"""
 
 try:
     import struct
diff --git a/adafruit_rgb_display/rgb.py b/adafruit_rgb_display/rgb.py
index 8df0966..d80d545 100644
--- a/adafruit_rgb_display/rgb.py
+++ b/adafruit_rgb_display/rgb.py
@@ -1,4 +1,33 @@
-""" Base class for all RGB Display devices """
+# The MIT License (MIT)
+#
+# Copyright (c) 2017 Radomir Dopieralski and Adafruit Industries
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+"""
+`adafruit_RGB_Display.rgb`
+====================================================
+
+Base class for all RGB Display devices
+
+* Author(s): Radomir Dopieralski, Michael McWethy
+"""
+
 import time
 from micropython import const
 try:
@@ -17,12 +46,14 @@
 
 
 def color565(r, g, b):
-    """Format color code for device"""
+    """Convert red, green and blue values (0-255) into a 16-bit 565 encoding.  As
+    a convenience this is also available in the parent adafruit_rgb_display
+    package namespace."""
     return (r & 0xf8) << 8 | (g & 0xfc) << 3 | b >> 3
 
 
 class DummyPin:
-    """A fake gpio pin for when you want to skip pins."""
+    """Can be used in place of a ``Pin()`` when you don't want to skip it."""
     def init(self, *args, **kwargs):
         """Dummy Pin init"""
         pass
@@ -37,7 +68,10 @@ def high(self):
 
 
 class Display: #pylint: disable-msg=no-member
-    """Base class for all RGB display devices"""
+    """Base class for all RGB display devices
+        :param width: number of pixels wide
+        :param height: number of pixels high
+    """
     _PAGE_SET = None
     _COLUMN_SET = None
     _RAM_WRITE = None
@@ -83,7 +117,7 @@ def _decode_pixel(self, data):
         return color565(*struct.unpack(self._DECODE_PIXEL, data))
 
     def pixel(self, x, y, color=None):
-        """Read or write a pixel."""
+        """Read or write a pixel at a given position."""
         if color is None:
             return self._decode_pixel(self._block(x, y, x, y))
 
@@ -93,7 +127,8 @@ def pixel(self, x, y, color=None):
 
     #pylint: disable-msg=too-many-arguments
     def fill_rectangle(self, x, y, width, height, color):
-        """Draw a filled rectangle."""
+        """Draw a rectangle at specified position with specified width and
+        height, and fill it with the specified color."""
         x = min(self.width - 1, max(0, x))
         y = min(self.height - 1, max(0, y))
         width = min(self.width - x, max(1, width))
@@ -109,7 +144,7 @@ def fill_rectangle(self, x, y, width, height, color):
     #pylint: enable-msg=too-many-arguments
 
     def fill(self, color=0):
-        """Fill whole screen."""
+        """Fill the whole display with the specified color."""
         self.fill_rectangle(0, 0, self.width, self.height, color)
 
     def hline(self, x, y, width, color):
diff --git a/adafruit_rgb_display/s6d02a1.py b/adafruit_rgb_display/s6d02a1.py
index 5709950..9f99070 100644
--- a/adafruit_rgb_display/s6d02a1.py
+++ b/adafruit_rgb_display/s6d02a1.py
@@ -1,4 +1,32 @@
-"""A simple driver for the S6D02A1-based displays."""
+# The MIT License (MIT)
+#
+# Copyright (c) 2017 Radomir Dopieralski and Adafruit Industries
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+"""
+`adafruit_RGB_Display.s6d02a1`
+====================================================
+
+A simple driver for the S6D02A1-based displays.
+
+* Author(s): Radomir Dopieralski, Michael McWethy
+"""
 
 from adafruit_rgb_display.rgb import DisplaySPI
 from micropython import const
diff --git a/adafruit_rgb_display/ssd1331.py b/adafruit_rgb_display/ssd1331.py
index fb918c4..2299bdd 100644
--- a/adafruit_rgb_display/ssd1331.py
+++ b/adafruit_rgb_display/ssd1331.py
@@ -1,4 +1,33 @@
-"""A simple driver for the SSD1331-based displays."""
+# The MIT License (MIT)
+#
+# Copyright (c) 2017 Radomir Dopieralski and Adafruit Industries
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+"""
+`adafruit_RGB_Display.ssd1331`
+====================================================
+
+A simple driver for the SSD1331-based displays.
+
+* Author(s): Radomir Dopieralski, Michael McWethy
+"""
+
 from adafruit_rgb_display.rgb import DisplaySPI
 from micropython import const
 
diff --git a/adafruit_rgb_display/ssd1351.py b/adafruit_rgb_display/ssd1351.py
index f824921..c3eee7c 100644
--- a/adafruit_rgb_display/ssd1351.py
+++ b/adafruit_rgb_display/ssd1351.py
@@ -1,4 +1,32 @@
-"""A simple driver for the SSD1351-based displays."""
+# The MIT License (MIT)
+#
+# Copyright (c) 2017 Radomir Dopieralski and Adafruit Industries
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+"""
+`adafruit_RGB_Display.ssd1351`
+====================================================
+
+A simple driver for the SSD1351-based displays.
+
+* Author(s): Radomir Dopieralski, Michael McWethy
+"""
 from adafruit_rgb_display.rgb import DisplaySPI
 from micropython import const
 
diff --git a/adafruit_rgb_display/st7735.py b/adafruit_rgb_display/st7735.py
index 62cd9ec..c119f07 100644
--- a/adafruit_rgb_display/st7735.py
+++ b/adafruit_rgb_display/st7735.py
@@ -1,4 +1,32 @@
-"""A simple driver for the ST7735-based displays."""
+# The MIT License (MIT)
+#
+# Copyright (c) 2017 Radomir Dopieralski and Adafruit Industries
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+"""
+`adafruit_RGB_Display.sst7735`
+====================================================
+
+A simple driver for the ST7735-based displays.
+
+* Author(s): Radomir Dopieralski, Michael McWethy
+"""
 
 from adafruit_rgb_display.rgb import DisplaySPI
 try:
diff --git a/api.rst b/api.rst
new file mode 100644
index 0000000..217b4e4
--- /dev/null
+++ b/api.rst
@@ -0,0 +1,23 @@
+
+.. If you created a package, create one automodule per module in the package.
+
+.. automodule:: adafruit_rgb_display.rgb
+   :members:
+
+.. automodule:: adafruit_rgb_display.hx8353
+  :members:
+
+.. automodule:: adafruit_rgb_display.ili9341
+   :members:
+
+.. automodule:: adafruit_rgb_display.s6d02a1
+  :members:
+
+.. automodule:: adafruit_rgb_display.ssd1331
+   :members:
+
+.. automodule:: adafruit_rgb_display.ssd1351
+  :members:
+
+.. automodule:: adafruit_rgb_display.st7735
+  :members:
diff --git a/conf.py b/conf.py
new file mode 100644
index 0000000..3f813f9
--- /dev/null
+++ b/conf.py
@@ -0,0 +1,147 @@
+# -*- coding: utf-8 -*-
+
+import os
+import sys
+sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration ------------------------------------------------
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.intersphinx',
+    'sphinx.ext.viewcode',
+]
+
+# Uncomment the below if you use native CircuitPython modules such as
+# digitalio, micropython and busio. List the modules you use. Without it, the
+# autodoc module docs will fail to generate with a warning.
+# autodoc_mock_imports = ["digitalio", "busio"]
+
+intersphinx_mapping = {'python': ('https://docs.python.org/3.4', None),'CircuitPython': ('https://circuitpython.readthedocs.io/en/latest/', None)}
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'README'
+
+# General information about the project.
+project = u'Adafruit RGB_Display Library'
+copyright = u'2017 Michale McWethy'
+author = u'Michale McWethy'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = u'1.0'
+# The full version, including alpha/beta/rc tags.
+release = u'1.0'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This patterns also effect to html_static_path and html_extra_path
+exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+#
+default_role = "any"
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#
+add_function_parentheses = True
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = False
+
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+on_rtd = os.environ.get('READTHEDOCS', None) == 'True'
+
+if not on_rtd:  # only import and set the theme if we're building docs locally
+    try:
+        import sphinx_rtd_theme
+        html_theme = 'sphinx_rtd_theme'
+        html_theme_path = [sphinx_rtd_theme.get_html_theme_path(), '.']
+    except:
+        html_theme = 'default'
+        html_theme_path = ['.']
+else:
+    html_theme_path = ['.']
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'AdafruitRgb_displayLibrarydoc'
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+     # The paper size ('letterpaper' or 'a4paper').
+     #
+     # 'papersize': 'letterpaper',
+
+     # The font size ('10pt', '11pt' or '12pt').
+     #
+     # 'pointsize': '10pt',
+
+     # Additional stuff for the LaTeX preamble.
+     #
+     # 'preamble': '',
+
+     # Latex figure (float) alignment
+     #
+     # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, 'AdafruitRGB_DisplayLibrary.tex', u'AdafruitRGB_Display Library Documentation',
+     author, 'manual'),
+]
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'AdafruitRGB_Displaylibrary', u'Adafruit RGB_Display Library Documentation',
+     [author], 1)
+]
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'AdafruitRGB_DisplayLibrary', u'Adafruit RGB_Display Library Documentation',
+     author, 'AdafruitRGB_DisplayLibrary', 'One line description of project.',
+     'Miscellaneous'),
+]
diff --git a/docs/Makefile b/docs/Makefile
deleted file mode 100644
index 6fe17cd..0000000
--- a/docs/Makefile
+++ /dev/null
@@ -1,177 +0,0 @@
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = sphinx-build
-PAPER         =
-BUILDDIR      = _build
-
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
-endif
-
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
-
-help:
-	@echo "Please use \`make <target>' where <target> is one of"
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  xml        to make Docutils-native XML files"
-	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-
-clean:
-	rm -rf $(BUILDDIR)/*
-
-html:
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
-
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Display.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Display.qhc"
-
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/Display"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Display"
-	@echo "# devhelp"
-
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
-
-xml:
-	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-	@echo
-	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-pseudoxml:
-	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-	@echo
-	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/docs/conf.py b/docs/conf.py
deleted file mode 100644
index 597c0a2..0000000
--- a/docs/conf.py
+++ /dev/null
@@ -1,266 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-# µDisplay documentation build configuration file, created by
-# sphinx-quickstart on Sun Aug 28 10:57:39 2016.
-#
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-import sys
-import os
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-#sys.path.insert(0, os.path.abspath('.'))
-
-# -- General configuration ------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-#needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be
-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
-# ones.
-extensions = [
-    'sphinx.ext.autodoc',
-    'sphinx.ext.intersphinx',
-    'sphinx.ext.viewcode',
-]
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix of source filenames.
-source_suffix = '.rst'
-
-# The encoding of source files.
-#source_encoding = 'utf-8-sig'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = u'MicroPython Adafruit RGB Display'
-copyright = u'2016, Radomir Dopieralski'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = '1.0.0'
-# The full version, including alpha/beta/rc tags.
-release = '1.0.0'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#language = None
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#today = ''
-# Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-exclude_patterns = ['_build']
-
-# The reST default role (used for this markup: `text`) to use for all
-# documents.
-#default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#show_authors = False
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
-
-# If true, keep warnings as "system message" paragraphs in the built documents.
-#keep_warnings = False
-
-
-# -- Options for HTML output ----------------------------------------------
-
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-html_theme = 'default'
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
-
-# The name for this set of Sphinx documents.  If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
-
-# A shorter title for the navigation bar.  Default is the same as html_title.
-#html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
-
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
-#html_extra_path = []
-
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
-
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-#html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
-
-# If false, no module index is generated.
-#html_domain_indices = True
-
-# If false, no index is generated.
-#html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'Displaydoc'
-
-
-# -- Options for LaTeX output ---------------------------------------------
-
-latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
-
-# The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
-
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title,
-#  author, documentclass [howto, manual, or own class]).
-latex_documents = [
-  ('index', 'Display.tex', u'µDisplay Documentation',
-   u'Radomir Dopieralski', 'manual'),
-]
-
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#latex_use_parts = False
-
-# If true, show page references after internal links.
-#latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-#latex_appendices = []
-
-# If false, no module index is generated.
-#latex_domain_indices = True
-
-
-# -- Options for manual page output ---------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('index', 'display', u'µDisplay Documentation',
-     [u'Radomir Dopieralski'], 1)
-]
-
-# If true, show URL addresses after external links.
-#man_show_urls = False
-
-
-# -- Options for Texinfo output -------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-#  dir menu entry, description, category)
-texinfo_documents = [
-  ('index', 'Display', u'µDisplay Documentation',
-   u'Radomir Dopieralski', 'Display', 'One line description of project.',
-   'Miscellaneous'),
-]
-
-# Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
-
-# If false, no module index is generated.
-#texinfo_domain_indices = True
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
-
-# If true, do not generate a @detailmenu in the "Top" node's menu.
-#texinfo_no_detailmenu = False
-
-
-# Example configuration for intersphinx: refer to the Python standard library.
-intersphinx_mapping = {'http://docs.python.org/': None}
diff --git a/docs/display.rst b/docs/display.rst
deleted file mode 100644
index e888a7a..0000000
--- a/docs/display.rst
+++ /dev/null
@@ -1,51 +0,0 @@
-Display Module
-**************
-
-.. module:: adafruit_rgb_display.rgb
-
-Utilities
-=========
-
-.. function:: color565(r, g, b)
-
-    Convert red, green and blue values (0-255) into a 16-bit 565 encoding.  As
-    a convenience this is also available in the parent adafruit_rgb_display
-    package namespace.
-
-.. class:: DummyPin()
-
-    Can be used in place of a ``Pin()`` when you don't want to skip it.
-
-
-Display Class
-=============
-
-This is the interface that all the display classes share.
-
-.. class:: Display(width, height)
-
-    .. method:: init()
-
-        Run the initialization commands for the given display (ran
-        automatically when the object is created).
-
-    .. method:: pixel(x, y, color)
-
-        Get or set the value of a pixel at the given position.
-
-    .. method:: fill_rectangle(x, y, width, height, color)
-
-        Draw a rectangle at specified position with specified width and
-        height, and fill it with the specified color.
-
-    .. method:: fill(color)
-
-        Fill the whole display with the specified color.
-
-    .. method:: hline(x, y, width, color)
-
-        Draw a horizontal line.
-
-    .. method:: vline(x, y, height, color)
-
-        Draw a vertical line.
diff --git a/docs/displays.rst b/docs/displays.rst
deleted file mode 100644
index add72c4..0000000
--- a/docs/displays.rst
+++ /dev/null
@@ -1,40 +0,0 @@
-List of Supported Displays
-**************************
-
-.. module:: adafruit_rgb_display.rgb
-
-All of those displays support the methods of the :class:`Display` class.
-
-.. module:: adafruit_rgb_display.hx8353
-.. class:: HX8353(spi, dc, cs, rst=None, width=128, height=128)
-
-    A TFT display.
-
-.. module:: adafruit_rgb_display.ili9341
-.. class:: ILI9241(spi, dc, cs, rst=None, width=240, height=320)
-
-    A TFT display.
-
-    .. method:: scroll(dy=None)
-
-        Get or set the vertical scroll position.
-
-.. module:: adafruit_rgb_display.s6d02a1
-.. class:: S6D02A1(spi, dc, cs, rst=None, width=128, height=160)
-
-    A TFT display.
-
-.. module:: adafruit_rgb_display.ssd1331
-.. class:: SSD1331(spi, dc, cs, rst=None, widht=96, height=64)
-
-    An OLED display.
-
-.. module:: adafruit_rgb_display.ssd1351
-.. class:: SSD1351(spi, dc, cs, rst=None, width=128, height=128)
-
-    An OLED display.
-
-.. module:: adafruit_rgb_display.st7735
-.. class:: ST7735(spi, dc, cs, rst=None, width=128, height=128)
-
-    A TFT display.
diff --git a/docs/index.rst b/docs/index.rst
deleted file mode 100644
index 06c42bb..0000000
--- a/docs/index.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-.. µDisplay documentation master file, created by
-   sphinx-quickstart on Sun Aug 28 10:57:39 2016.
-   You can adapt this file completely to your liking, but it should at least
-   contain the root `toctree` directive.
-
-Welcome to Adafruit MicroPython's RGB Display documentation!
-=============================================================
-
-Contents:
-
-.. toctree::
-   :maxdepth: 2
-
-   display.rst
-   displays.rst
-
-
-Indices and tables
-==================
-
-* :ref:`genindex`
-* :ref:`modindex`
-* :ref:`search`
diff --git a/docs/make.bat b/docs/make.bat
deleted file mode 100644
index 5000e1b..0000000
--- a/docs/make.bat
+++ /dev/null
@@ -1,242 +0,0 @@
-@ECHO OFF
-
-REM Command file for Sphinx documentation
-
-if "%SPHINXBUILD%" == "" (
-	set SPHINXBUILD=sphinx-build
-)
-set BUILDDIR=_build
-set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
-set I18NSPHINXOPTS=%SPHINXOPTS% .
-if NOT "%PAPER%" == "" (
-	set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
-	set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
-)
-
-if "%1" == "" goto help
-
-if "%1" == "help" (
-	:help
-	echo.Please use `make ^<target^>` where ^<target^> is one of
-	echo.  html       to make standalone HTML files
-	echo.  dirhtml    to make HTML files named index.html in directories
-	echo.  singlehtml to make a single large HTML file
-	echo.  pickle     to make pickle files
-	echo.  json       to make JSON files
-	echo.  htmlhelp   to make HTML files and a HTML help project
-	echo.  qthelp     to make HTML files and a qthelp project
-	echo.  devhelp    to make HTML files and a Devhelp project
-	echo.  epub       to make an epub
-	echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter
-	echo.  text       to make text files
-	echo.  man        to make manual pages
-	echo.  texinfo    to make Texinfo files
-	echo.  gettext    to make PO message catalogs
-	echo.  changes    to make an overview over all changed/added/deprecated items
-	echo.  xml        to make Docutils-native XML files
-	echo.  pseudoxml  to make pseudoxml-XML files for display purposes
-	echo.  linkcheck  to check all external links for integrity
-	echo.  doctest    to run all doctests embedded in the documentation if enabled
-	goto end
-)
-
-if "%1" == "clean" (
-	for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
-	del /q /s %BUILDDIR%\*
-	goto end
-)
-
-
-%SPHINXBUILD% 2> nul
-if errorlevel 9009 (
-	echo.
-	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
-	echo.installed, then set the SPHINXBUILD environment variable to point
-	echo.to the full path of the 'sphinx-build' executable. Alternatively you
-	echo.may add the Sphinx directory to PATH.
-	echo.
-	echo.If you don't have Sphinx installed, grab it from
-	echo.http://sphinx-doc.org/
-	exit /b 1
-)
-
-if "%1" == "html" (
-	%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/html.
-	goto end
-)
-
-if "%1" == "dirhtml" (
-	%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
-	goto end
-)
-
-if "%1" == "singlehtml" (
-	%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
-	goto end
-)
-
-if "%1" == "pickle" (
-	%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can process the pickle files.
-	goto end
-)
-
-if "%1" == "json" (
-	%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can process the JSON files.
-	goto end
-)
-
-if "%1" == "htmlhelp" (
-	%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can run HTML Help Workshop with the ^
-.hhp project file in %BUILDDIR%/htmlhelp.
-	goto end
-)
-
-if "%1" == "qthelp" (
-	%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can run "qcollectiongenerator" with the ^
-.qhcp project file in %BUILDDIR%/qthelp, like this:
-	echo.^> qcollectiongenerator %BUILDDIR%\qthelp\Display.qhcp
-	echo.To view the help file:
-	echo.^> assistant -collectionFile %BUILDDIR%\qthelp\Display.ghc
-	goto end
-)
-
-if "%1" == "devhelp" (
-	%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished.
-	goto end
-)
-
-if "%1" == "epub" (
-	%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The epub file is in %BUILDDIR%/epub.
-	goto end
-)
-
-if "%1" == "latex" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "latexpdf" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	cd %BUILDDIR%/latex
-	make all-pdf
-	cd %BUILDDIR%/..
-	echo.
-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "latexpdfja" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	cd %BUILDDIR%/latex
-	make all-pdf-ja
-	cd %BUILDDIR%/..
-	echo.
-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "text" (
-	%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The text files are in %BUILDDIR%/text.
-	goto end
-)
-
-if "%1" == "man" (
-	%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The manual pages are in %BUILDDIR%/man.
-	goto end
-)
-
-if "%1" == "texinfo" (
-	%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
-	goto end
-)
-
-if "%1" == "gettext" (
-	%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
-	goto end
-)
-
-if "%1" == "changes" (
-	%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.The overview file is in %BUILDDIR%/changes.
-	goto end
-)
-
-if "%1" == "linkcheck" (
-	%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Link check complete; look for any errors in the above output ^
-or in %BUILDDIR%/linkcheck/output.txt.
-	goto end
-)
-
-if "%1" == "doctest" (
-	%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Testing of doctests in the sources finished, look at the ^
-results in %BUILDDIR%/doctest/output.txt.
-	goto end
-)
-
-if "%1" == "xml" (
-	%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The XML files are in %BUILDDIR%/xml.
-	goto end
-)
-
-if "%1" == "pseudoxml" (
-	%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
-	goto end
-)
-
-:end
diff --git a/readthedocs.yml b/readthedocs.yml
new file mode 100644
index 0000000..f4243ad
--- /dev/null
+++ b/readthedocs.yml
@@ -0,0 +1,3 @@
+python:
+    version: 3
+requirements_file: requirements.txt
diff --git a/requirements.txt b/requirements.txt
new file mode 100644
index 0000000..8b13789
--- /dev/null
+++ b/requirements.txt
@@ -0,0 +1 @@
+
diff --git a/setup.py b/setup.py
deleted file mode 100644
index f416e11..0000000
--- a/setup.py
+++ /dev/null
@@ -1,20 +0,0 @@
-from distutils.core import setup
-
-
-setup(
-    name='adafruit-rgb-display',
-    packages=[
-        'adafruit_rgb_display',
-    ],
-    version="2.0.0",
-    description="Drivers for RGB displays for Adafruit MicroPython.",
-    long_description="""\
-This library lets you use a number of popular RGB displays with Adafruit MicroPython.""",
-    author='Radomir Dopieralski',
-    author_email='support@adafruit.com',
-    classifiers = [
-        'Programming Language :: Python :: 3',
-        'License :: OSI Approved :: MIT License',
-    ],
-    url="https://github.com/adafruit/Adafruit_MicroPython_RGB_Display",
-)