diff --git a/adafruit_motor/stepper.py b/adafruit_motor/stepper.py
index 7babf84..ffa78bc 100644
--- a/adafruit_motor/stepper.py
+++ b/adafruit_motor/stepper.py
@@ -69,17 +69,14 @@ class StepperMotor:
     :param ~pulseio.PWMOut bin2: `pulseio.PWMOut`-compatible output connected to the driver for
       the fourth coil (unipolar) or second input to second coil (bipolar).
     :param int microsteps: Number of microsteps between full steps. Must be at least 2 and even.
-
-    .. note:: The ``StepperMotor`` class requires PWM frequencies > 1500. Specify
-      ``frequency=1500`` or higher when instantiating the above ``PWMOut`` objects.
     """
     def __init__(self, ain1, ain2, bin1, bin2, *, microsteps=16):
         self._coil = (ain2, bin1, ain1, bin2)
 
-        # reject unsafe (low) pwm freq
+	# set a safe pwm freq for each output
         for i in range(4):
             if self._coil[i].frequency < 1500:
-                raise ValueError("PWMOut: 'frequency' must be at least 1500")
+                self._coil[i].frequency = 2000
 
         self._current_microstep = 0
         if microsteps < 2:
diff --git a/examples/stepper_motor.py b/examples/stepper_motor.py
index e56f5f0..39020af 100644
--- a/examples/stepper_motor.py
+++ b/examples/stepper_motor.py
@@ -1,24 +1,39 @@
-# Run a Stepper Motor. Tested on ItsyBitsy M4 Express + DRV8833.
-#   https://www.adafruit.com/product/3800
-#   https://www.adafruit.com/product/3297
+# This example uses an Adafruit Stepper and DC Motor FeatherWing to run a Stepper Motor.
+#   https://www.adafruit.com/product/2927
 
 import time
 
-import board
-import pulseio
+from board import SCL, SDA
+import busio
+
+# Import the PCA9685 module. Available in the bundle and here:
+#   https://github.com/adafruit/Adafruit_CircuitPython_PCA9685
+from adafruit_pca9685 import PCA9685
+
 from adafruit_motor import stepper
 
-AIn1 = pulseio.PWMOut(board.D9, frequency=1600)
-AIn2 = pulseio.PWMOut(board.D10, frequency=1600)
-BIn1 = pulseio.PWMOut(board.D11, frequency=1600)
-BIn2 = pulseio.PWMOut(board.D12, frequency=1600)
+i2c = busio.I2C(SCL, SDA)
+
+# Create a simple PCA9685 class instance for the Motor FeatherWing's default address.
+pca = PCA9685(i2c, address=0x60)
+pca.frequency = 1600
 
-stepper_motor = stepper.StepperMotor(AIn1, AIn2, BIn1, BIn2)
+# Motor 1 is channels 9 and 10 with 8 held high.
+# Motor 2 is channels 11 and 12 with 13 held high.
+# Motor 3 is channels 3 and 4 with 2 held high.
+# Motor 4 is channels 5 and 6 with 7 held high.
 
-for i in range(1000):
+pca.channels[7].duty_cycle = 0xffff
+pca.channels[2].duty_cycle = 0xffff
+stepper_motor = stepper.StepperMotor(pca.channels[4], pca.channels[3], # Motor 3
+                                     pca.channels[5], pca.channels[6]) # Motor 4
+
+for i in range(100):
     stepper_motor.onestep()
     time.sleep(0.01)
 
-for i in range(1000):
+for i in range(100):
     stepper_motor.onestep(direction=stepper.BACKWARD)
     time.sleep(0.01)
+
+pca.deinit()
diff --git a/examples/stepper_motor_pca9685.py b/examples/stepper_motor_pca9685.py
deleted file mode 100644
index 39020af..0000000
--- a/examples/stepper_motor_pca9685.py
+++ /dev/null
@@ -1,39 +0,0 @@
-# This example uses an Adafruit Stepper and DC Motor FeatherWing to run a Stepper Motor.
-#   https://www.adafruit.com/product/2927
-
-import time
-
-from board import SCL, SDA
-import busio
-
-# Import the PCA9685 module. Available in the bundle and here:
-#   https://github.com/adafruit/Adafruit_CircuitPython_PCA9685
-from adafruit_pca9685 import PCA9685
-
-from adafruit_motor import stepper
-
-i2c = busio.I2C(SCL, SDA)
-
-# Create a simple PCA9685 class instance for the Motor FeatherWing's default address.
-pca = PCA9685(i2c, address=0x60)
-pca.frequency = 1600
-
-# Motor 1 is channels 9 and 10 with 8 held high.
-# Motor 2 is channels 11 and 12 with 13 held high.
-# Motor 3 is channels 3 and 4 with 2 held high.
-# Motor 4 is channels 5 and 6 with 7 held high.
-
-pca.channels[7].duty_cycle = 0xffff
-pca.channels[2].duty_cycle = 0xffff
-stepper_motor = stepper.StepperMotor(pca.channels[4], pca.channels[3], # Motor 3
-                                     pca.channels[5], pca.channels[6]) # Motor 4
-
-for i in range(100):
-    stepper_motor.onestep()
-    time.sleep(0.01)
-
-for i in range(100):
-    stepper_motor.onestep(direction=stepper.BACKWARD)
-    time.sleep(0.01)
-
-pca.deinit()