Reformatting per pre-commit

Author: tekktrik

adafruit_mcp230xx/digital_inout.py

@@ -15,7 +15,7 @@
 import digitalio
 
 try:
-    import typing # pylint: disable=unused-import
+    import typing  # pylint: disable=unused-import
     from adafruit_mcp230xx.mcp230xx import MCP230XX
     from digitalio import Pull, Direction
 except ImportError:
@@ -67,7 +67,9 @@ def switch_to_output(self, value: bool = False, **kwargs):
         self.direction = digitalio.Direction.OUTPUT
         self.value = value
 
-    def switch_to_input(self, pull: Pull = None, invert_polarity: bool = False, **kwargs):
+    def switch_to_input(
+        self, pull: Pull = None, invert_polarity: bool = False, **kwargs
+    ):
         """Switch the pin state to a digital input with the provided starting
         pull-up resistor state (optional, no pull-up by default) and input polarity.  Note that
         pull-down resistors are NOT supported!

adafruit_mcp230xx/mcp23008.py

@@ -17,7 +17,7 @@
 from .digital_inout import DigitalInOut
 
 try:
-    import typing # pylint: disable=unused-import
+    import typing  # pylint: disable=unused-import
     from busio import I2C
 except ImportError:
     pass

adafruit_mcp230xx/mcp23016.py

@@ -25,7 +25,7 @@
 from .digital_inout import DigitalInOut
 
 try:
-    import typing # pylint: disable=unused-import
+    import typing  # pylint: disable=unused-import
     from busio import I2C
 except ImportError:
     pass

adafruit_mcp230xx/mcp23017.py

@@ -19,7 +19,7 @@
 from .digital_inout import DigitalInOut
 
 try:
-    import typing # pylint: disable=unused-import
+    import typing  # pylint: disable=unused-import
     from busio import I2C
 except ImportError:
     pass

adafruit_mcp230xx/mcp23s08.py

@@ -18,7 +18,7 @@
 from .digital_inout import DigitalInOut
 
 try:
-    import typing # pylint: disable=unused-import
+    import typing  # pylint: disable=unused-import
     from busio import SPI
     import digitalio
 except ImportError:
@@ -46,7 +46,12 @@ class MCP23S08(MCP23SXX):
     """
 
     def __init__(
-        self, spi: SPI, chip_select: digitalio.DigitalInOut, address: int = _MCP23S08_ADDRESS, reset: bool = True, baudrate: int = 100000
+        self,
+        spi: SPI,
+        chip_select: digitalio.DigitalInOut,
+        address: int = _MCP23S08_ADDRESS,
+        reset: bool = True,
+        baudrate: int = 100000,
     ):
         super().__init__(spi, address, chip_select, baudrate=baudrate)
         # For user information

adafruit_mcp230xx/mcp23s17.py

@@ -18,7 +18,7 @@
 from .digital_inout import DigitalInOut
 
 try:
-    import typing # pylint: disable=unused-import
+    import typing  # pylint: disable=unused-import
     from busio import SPI
     import digitalio
 except ImportError:
@@ -53,7 +53,12 @@ class MCP23S17(MCP23SXX):
     """
 
     def __init__(
-        self, spi: SPI, chip_select: digitalio.DigitalInOut, address: int = _MCP23S17_ADDRESS, reset: bool = True, baudrate: int = 100000
+        self,
+        spi: SPI,
+        chip_select: digitalio.DigitalInOut,
+        address: int = _MCP23S17_ADDRESS,
+        reset: bool = True,
+        baudrate: int = 100000,
     ):
         super().__init__(spi, address, chip_select, baudrate=baudrate)
         # For user information
@@ -74,7 +79,7 @@ def gpio(self):
         return self._read_u16le(_MCP23S17_GPIOA)
 
     @gpio.setter
-    def gpio(self, val: int) :
+    def gpio(self, val: int):
         self._write_u16le(_MCP23S17_GPIOA, val)
 
     @property

adafruit_mcp230xx/mcp23sxx.py

@@ -16,7 +16,7 @@
 from .mcp23xxx import MCP23XXX
 
 try:
-    import typing # pylint: disable=unused-import
+    import typing  # pylint: disable=unused-import
     from busio import SPI
     import digitalio
 except ImportError:
@@ -37,7 +37,13 @@
 class MCP23SXX(MCP23XXX):
     """Base class for MCP23Sxx devices."""
 
-    def __init__(self, spi: SPI, address: int, chip_select: digitalio.DigitalInOut, baudrate: int = 100000):
+    def __init__(
+        self,
+        spi: SPI,
+        address: int,
+        chip_select: digitalio.DigitalInOut,
+        baudrate: int = 100000,
+    ):
         self.cmd_write = MCP23SXX_CODE_WRITE | (address << 1)
         self.cmd_read = MCP23SXX_CODE_READ | (address << 1)
         super().__init__(spi, address, chip_select, baudrate=baudrate)

adafruit_mcp230xx/mcp23xxx.py

@@ -27,7 +27,13 @@
 class MCP23XXX:
     """Base class for MCP23xxx devices."""
 
-    def __init__(self, bus_device: Union[I2C, SPI], address: int, chip_select: Optional[digitalio.DigitalInOut] = None, baudrate: int = 100000):
+    def __init__(
+        self,
+        bus_device: Union[I2C, SPI],
+        address: int,
+        chip_select: Optional[digitalio.DigitalInOut] = None,
+        baudrate: int = 100000,
+    ):
         if chip_select is None:
             self._device = i2c_device.I2CDevice(bus_device, address)
         else: