pylinting examples

Author: jerryneedell

examples/esp_atcontrol_countviewer.py

@@ -7,11 +7,13 @@
 import time
 import board
 import busio
+import neopixel
 from digitalio import DigitalInOut
+from digitalio import Direction
+import adafruit_espatcontrol.adafruit_espatcontrol_socket as socket
 from adafruit_espatcontrol import adafruit_espatcontrol
-from adafruit_espatcontrol import adafruit_espatcontrol_requests as requests
 from adafruit_ht16k33 import segments
-import neopixel
+import adafruit_requests as requests
 
 # Get wifi details and more from a secrets.py file
 try:
@@ -59,23 +61,20 @@
 #DATA_LOCATION = [0, "followers_count"]
 
 # on metro_m4
-uart = busio.UART(board.TX, board.RX, timeout=0.1)
-resetpin = DigitalInOut(board.D5)
-rtspin = DigitalInOut(board.D6)
+#uart = busio.UART(board.TX, board.RX, timeout=0.1)
+#resetpin = DigitalInOut(board.D5)
+#rtspin = DigitalInOut(board.D6)
 
 
 # With a Particle Argon
-"""
 RX = board.ESP_TX
 TX = board.ESP_RX
 resetpin = DigitalInOut(board.ESP_WIFI_EN)
 rtspin = DigitalInOut(board.ESP_CTS)
 uart = busio.UART(TX, RX, timeout=0.1)
 esp_boot = DigitalInOut(board.ESP_BOOT_MODE)
-from digitalio import Direction
 esp_boot.direction = Direction.OUTPUT
 esp_boot.value = True
-"""
 
 
 
@@ -85,7 +84,7 @@
                                           rts_pin=rtspin, debug=False)
 esp.hard_reset()
 
-requests.set_interface(esp)
+requests.set_socket(socket, esp)
 
 # Create the I2C interface.
 i2c = busio.I2C(board.SCL, board.SDA)

examples/esp_atcontrol_webclient.py

@@ -2,10 +2,11 @@
 import board
 import busio
 from digitalio import DigitalInOut
-
-# ESP32 AT
+from digitalio import Direction
+import adafruit_espatcontrol.adafruit_espatcontrol_socket as socket
 from adafruit_espatcontrol import adafruit_espatcontrol
-from adafruit_espatcontrol import adafruit_espatcontrol_requests as requests
+import adafruit_requests as requests
+
 
 # Get wifi details and more from a secrets.py file
 try:
@@ -16,22 +17,20 @@
 
 
 # With a Metro or Feather M4
-uart = busio.UART(board.TX, board.RX, timeout=0.1)
-resetpin = DigitalInOut(board.D5)
-rtspin = DigitalInOut(board.D6)
+#uart = busio.UART(board.TX, board.RX, timeout=0.1)
+#resetpin = DigitalInOut(board.D5)
+#rtspin = DigitalInOut(board.D6)
 
 # With a Particle Argon
-"""
 RX = board.ESP_TX
 TX = board.ESP_RX
 resetpin = DigitalInOut(board.ESP_WIFI_EN)
 rtspin = DigitalInOut(board.ESP_CTS)
 uart = busio.UART(TX, RX, timeout=0.1)
 esp_boot = DigitalInOut(board.ESP_BOOT_MODE)
-from digitalio import Direction
 esp_boot.direction = Direction.OUTPUT
 esp_boot.value = True
-"""
+
 
 
 print("ESP AT commands")
@@ -44,7 +43,7 @@
 print("Resetting ESP module")
 esp.hard_reset()
 
-requests.set_interface(esp)
+requests.set_socket(socket, esp)
 
 while True:
     try: