improving_importing_description

Author: jposada202020

examples/bme280_simpletest.py

@@ -3,16 +3,16 @@
 
 import time
 import board
-from adafruit_bme280 import basic
+from adafruit_bme280 import basic as adafruit_bme280
 
 # Create sensor object, using the board's default I2C bus.
 i2c = board.I2C()  # uses board.SCL and board.SDA
-bme280 = basic.Adafruit_BME280_I2C(i2c)
+bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c)
 
 # OR create sensor object, using the board's default SPI bus.
 # spi = board.SPI()
 # bme_cs = digitalio.DigitalInOut(board.D10)
-# bme280 = basic.Adafruit_BME280_SPI(spi, bme_cs)
+# bme280 = adafruit_bme280.Adafruit_BME280_SPI(spi, bme_cs)
 
 # change this to match the location's pressure (hPa) at sea level
 bme280.sea_level_pressure = 1013.25

examples/bme280_simpletest_pico.py

@@ -4,16 +4,16 @@
 import time
 import board
 import busio
-from adafruit_bme280 import basic
+from adafruit_bme280 import basic as adafruit_bme280
 
 # Create sensor object, using the board's default I2C bus.
 i2c = busio.I2C(board.GP1, board.GP0)  # SCL, SDA
-bme280 = basic.Adafruit_BME280_I2C(i2c)
+bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c)
 
 # OR create sensor object, using the board's default SPI bus.
 # spi = busio.SPI(board.GP2, MISO=board.GP0, MOSI=board.GP3)
 # bme_cs = digitalio.DigitalInOut(board.GP1)
-# bme280 = basic.Adafruit_BME280_SPI(spi, bme_cs)
+# bme280 = adafruit_bme280.Adafruit_BME280_SPI(spi, bme_cs)
 
 # change this to match the location's pressure (hPa) at sea level
 bme280.sea_level_pressure = 1013.25