rust: add build_error! to the prelude

The sibling `build_assert!` is already in the prelude, it makes sense
that a "core"/"language" facility like this is part of the prelude and
users should not be defining their own one (thus there should be no risk
of future name collisions and we would want to be aware of them anyway).

Thus add `build_error!` into the prelude.

Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Applied the change to the new miscdevice cases. - Miguel ]
Signed-off-by: Miguel Ojeda <[email protected]>

Author: ojeda

Diff for: rust/kernel/block/mq/operations.rs

@@ -9,6 +9,7 @@ use crate::{
     block::mq::request::RequestDataWrapper,
     block::mq::Request,
     error::{from_result, Result},
+    prelude::*,
     types::ARef,
 };
 use core::{marker::PhantomData, sync::atomic::AtomicU64, sync::atomic::Ordering};
@@ -35,7 +36,7 @@ pub trait Operations: Sized {
     /// Called by the kernel to poll the device for completed requests. Only
     /// used for poll queues.
     fn poll() -> bool {
-        crate::build_error!(crate::error::VTABLE_DEFAULT_ERROR)
+        build_error!(crate::error::VTABLE_DEFAULT_ERROR)
     }
 }
 

Diff for: rust/kernel/build_assert.rs

@@ -14,7 +14,6 @@ pub use build_error::build_error;
 /// # Examples
 ///
 /// ```
-/// # use kernel::build_error;
 /// #[inline]
 /// fn foo(a: usize) -> usize {
 ///     a.checked_add(1).unwrap_or_else(|| build_error!("overflow"))

Diff for: rust/kernel/miscdevice.rs

@@ -116,7 +116,7 @@ pub trait MiscDevice {
         _cmd: u32,
         _arg: usize,
     ) -> Result<isize> {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Handler for ioctls.
@@ -132,7 +132,7 @@ pub trait MiscDevice {
         _cmd: u32,
         _arg: usize,
     ) -> Result<isize> {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 }
 

Diff for: rust/kernel/net/phy.rs

@@ -587,17 +587,17 @@ pub trait Driver {
 
     /// Issues a PHY software reset.
     fn soft_reset(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Sets up device-specific structures during discovery.
     fn probe(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Probes the hardware to determine what abilities it has.
     fn get_features(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Returns true if this is a suitable driver for the given phydev.
@@ -609,32 +609,32 @@ pub trait Driver {
     /// Configures the advertisement and resets auto-negotiation
     /// if auto-negotiation is enabled.
     fn config_aneg(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Determines the negotiated speed and duplex.
     fn read_status(_dev: &mut Device) -> Result<u16> {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Suspends the hardware, saving state if needed.
     fn suspend(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Resumes the hardware, restoring state if needed.
     fn resume(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Overrides the default MMD read function for reading a MMD register.
     fn read_mmd(_dev: &mut Device, _devnum: u8, _regnum: u16) -> Result<u16> {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Overrides the default MMD write function for writing a MMD register.
     fn write_mmd(_dev: &mut Device, _devnum: u8, _regnum: u16, _val: u16) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Callback for notification of link change.

Diff for: rust/kernel/prelude.rs

@@ -19,7 +19,7 @@ pub use crate::alloc::{flags::*, Box, KBox, KVBox, KVVec, KVec, VBox, VVec, Vec}
 #[doc(no_inline)]
 pub use macros::{module, pin_data, pinned_drop, vtable, Zeroable};
 
-pub use super::build_assert;
+pub use super::{build_assert, build_error};
 
 // `super::std_vendor` is hidden, which makes the macro inline for some reason.
 #[doc(no_inline)]

Diff for: rust/macros/lib.rs

@@ -123,12 +123,12 @@ pub fn module(ts: TokenStream) -> TokenStream {
 /// used on the Rust side, it should not be possible to call the default
 /// implementation. This is done to ensure that we call the vtable methods
 /// through the C vtable, and not through the Rust vtable. Therefore, the
-/// default implementation should call `kernel::build_error!`, which prevents
+/// default implementation should call `build_error!`, which prevents
 /// calls to this function at compile time:
 ///
 /// ```compile_fail
 /// # // Intentionally missing `use`s to simplify `rusttest`.
-/// kernel::build_error!(VTABLE_DEFAULT_ERROR)
+/// build_error!(VTABLE_DEFAULT_ERROR)
 /// ```
 ///
 /// Note that you might need to import [`kernel::error::VTABLE_DEFAULT_ERROR`].
@@ -145,11 +145,11 @@ pub fn module(ts: TokenStream) -> TokenStream {
 /// #[vtable]
 /// pub trait Operations: Send + Sync + Sized {
 ///     fn foo(&self) -> Result<()> {
-///         kernel::build_error!(VTABLE_DEFAULT_ERROR)
+///         build_error!(VTABLE_DEFAULT_ERROR)
 ///     }
 ///
 ///     fn bar(&self) -> Result<()> {
-///         kernel::build_error!(VTABLE_DEFAULT_ERROR)
+///         build_error!(VTABLE_DEFAULT_ERROR)
 ///     }
 /// }
 ///