diff --git a/README.md b/README.md
index d420954..95b01ce 100644
--- a/README.md
+++ b/README.md
@@ -2,62 +2,10 @@
 
 Library for the [ArduinoLearningKitStarter (ALKS) board](https://github.com/RoboticsBrno/ArduinoLearningKitStarter/) by RoboticsBrno with definition of pins and initialization of peripheries ([wiki](https://github.com/RoboticsBrno/ArduinoLearningKitStarter/wiki)).
 
-## Available in library managers
+## How to install
 
-### Arduino Library Manager
+Installation with [Arduino IDE](https://github.com/RoboticsBrno/ArduinoLearningKitStarter/wiki/Installation-with-Arduino-IDE) or [PlatformIO](https://github.com/RoboticsBrno/ArduinoLearningKitStarter/wiki/Installation-with-PlatformIO).
 
-Available at the Arduino Library Manager in Arduino IDE. To access it type `CTRL` + `SHIFT` + `I` or `Sketch` -> `Include Library` -> `Manage Libraries..` and type `ALSK` or `ArduinoLearningKitStarter`. If you find the library, click on install button.
+## Using this library
 
-### [PlatformIO Library Manager](https://platformio.org/lib/show/1745/ArduinoLearningKitStarter/)
-
-Available with PlatformIO - [instalation steps](https://platformio.org/lib/show/1745/ArduinoLearningKitStarter/installation). 
-
-## Available methods
-
-- `void setupLeds()` - sets the pins for LEDs to output
-- `void setupRgbLeds()` - sets the pins for RGB LEDs to output
-- `void setupButtons()` - sets the pins for buttons to input with pull-up
-- `void setupPiezo()` - sets the pins for piezo to output
-- `void setupAll()` - calls all previous functions
-
-[Source code for the methods](https://github.com/RoboticsBrno/ArduinoLearningKitStarter-library/blob/master/src/ALKS.cpp)
-
-## Available pins
-Definition of pins, which are possible to use on board ALKS ([PDF with pinout on board](https://github.com/RoboticsBrno/ArduinoLearningKitStarter/blob/master/docs/pinout.pdf)).
-
-### LEDs
-- `L_R` or `LED_RED`   
-- `L_G` or `LED_GREEN`   
-- `L_Y` or `LED_YELLOW` 
-- `L_B` or `LED_BLUE` 
-- `L_RGB_R` or `LED_RGB_RED`
-- `L_RGB_G` or `LED_RGB_GREEN`
-- `L_RGB_B` or `LED_RGB_BLUE`
-
-### Servos
-- `S1` or `SERVO1`
-- `S2` or `SERVO2`
-- `S3` or `SERVO3`
-- `S4` or `SERVO4`
-- `S5` or `SERVO5`
-
-### Switches/Buttons
-- `SW1`
-- `SW2`
-- `SW3`
-
-### Potentiometers
-- `POT1`
-- `POT2`
-
-### Piezo
-- `PIEZO1`
-- `PIEZO2`
-
-### Photoresistor
-- `PHOTO`
-
-### DHT11 pin 
-- `DHT_PIN`
-
-[Source code for the pins definition](https://github.com/RoboticsBrno/ArduinoLearningKitStarter-library/blob/master/src/ALKS.h)
+Available [functions](https://github.com/RoboticsBrno/ArduinoLearningKitStarter/wiki/Available-functions) and [pin definitions](https://github.com/RoboticsBrno/ArduinoLearningKitStarter/wiki/Pinout-en), [example](https://github.com/RoboticsBrno/ArduinoLearningKitStarter/wiki/First-program) is also available.