pins_arduino.h

#ifndef Pins_Arduino_h
#define Pins_Arduino_h

#include <stdint.h>
#include "soc/soc_caps.h"

// BOOT_MODE 35
// BOOT_MODE2 36 pullup

static const uint8_t TX = 37;
static const uint8_t RX = 38;

static const uint8_t SDA = 7;
static const uint8_t SCL = 8;

// Use GPIOs 36 or lower on the P4 DevKit to avoid LDO power issues with high numbered GPIOs.
static const uint8_t SS = 26;
static const uint8_t MOSI = 32;
static const uint8_t MISO = 33;
static const uint8_t SCK = 36;

static const uint8_t A0 = 16;
static const uint8_t A1 = 17;
static const uint8_t A2 = 18;
static const uint8_t A3 = 19;
static const uint8_t A4 = 20;
static const uint8_t A5 = 21;
static const uint8_t A6 = 22;
static const uint8_t A7 = 23;
static const uint8_t A8 = 49;
static const uint8_t A9 = 50;
static const uint8_t A10 = 51;
static const uint8_t A11 = 52;
static const uint8_t A12 = 53;
static const uint8_t A13 = 54;

static const uint8_t T0 = 2;
static const uint8_t T1 = 3;
static const uint8_t T2 = 4;
static const uint8_t T3 = 5;
static const uint8_t T4 = 6;
static const uint8_t T5 = 7;
static const uint8_t T6 = 8;
static const uint8_t T7 = 9;
static const uint8_t T8 = 10;
static const uint8_t T9 = 11;
static const uint8_t T10 = 12;
static const uint8_t T11 = 13;
static const uint8_t T12 = 14;
static const uint8_t T13 = 15;

/* ESP32-P4 EV Function board specific definitons */
//ETH
#define ETH_PHY_TYPE    ETH_PHY_TLK110
#define ETH_PHY_ADDR    1
#define ETH_PHY_MDC     31
#define ETH_PHY_MDIO    52
#define ETH_PHY_POWER   51
#define ETH_RMII_TX_EN  49
#define ETH_RMII_TX0    34
#define ETH_RMII_TX1    35
#define ETH_RMII_RX0    29
#define ETH_RMII_RX1_EN 30
#define ETH_RMII_CRS_DV 28
#define ETH_RMII_CLK    50
#define ETH_CLK_MODE    EMAC_CLK_EXT_IN

//SDMMC
#define BOARD_HAS_SDMMC
#define BOARD_SDMMC_SLOT 0
#define BOARD_SDMMC_POWER_CHANNEL 4
#define BOARD_SDMMC_POWER_PIN 45
#define BOARD_SDMMC_POWER_ON_LEVEL LOW

//WIFI - ESP32C6
#define BOARD_HAS_SDIO_ESP_HOSTED
#define BOARD_SDIO_ESP_HOSTED_CLK 18
#define BOARD_SDIO_ESP_HOSTED_CMD 19
#define BOARD_SDIO_ESP_HOSTED_D0 14
#define BOARD_SDIO_ESP_HOSTED_D1 15
#define BOARD_SDIO_ESP_HOSTED_D2 16
#define BOARD_SDIO_ESP_HOSTED_D3 17
#define BOARD_SDIO_ESP_HOSTED_RESET 54

#endif /* Pins_Arduino_h */