CMakeLists.txt

@@ -33,3 +33,5 @@ add_custom_command(
 	VERBATIM
 )
 add_custom_target(mem-variant DEPENDS "mem_variant")
+
+idf_build_set_property(COMPILE_DEFINITIONS "-DESP32_ARDUINO_LIB_BUILDER" APPEND)

README.md

@@ -2,17 +2,17 @@
 
 This repository contains the scripts that produce the libraries included with Tasmota esp32-arduino.
 
+Tested on Ubuntu and MacOS.
+
 ### Build on Ubuntu
 ```bash
-sudo apt update && sudo apt install -y git wget curl libssl-dev libncurses-dev flex bison gperf python3 cmake ninja-build ccache jq
-curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py && python3 get-pip.py && \
-pip3 install setuptools pyserial click future wheel cryptography pyparsing pyelftools
-git clone https://github.com/Jason2866/esp32-arduino-lib-builder
+sudo apt-get install git wget curl libssl-dev libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-click python-cryptography python-future python-pyparsing python-pyelftools cmake ninja-build ccache jq
+sudo pip install --upgrade pip
+git clone https://github.com/espressif/esp32-arduino-lib-builder
 cd esp32-arduino-lib-builder
 ./build.sh
 ```
 
-
 ### Using the User Interface
 
 You can more easily build the libraries using the user interface found in the `tools/config_editor/` folder.
@@ -22,25 +22,23 @@ For more information and troubleshooting, please refer to the [UI README](tools/
 
 To use it, follow these steps:
 
-1. Make sure you have the required dependencies installed:
+1. Make sure you have the following prerequisites:
   - Python 3.9 or later
-  - The [Textual](https://github.com/textualize/textual/) library
   - All the dependencies listed in the previous section
 
-2. Execute the script `tools/config_editor/app.py` from any folder. It will automatically detect the path to the root of the repository.
+2. Install the required UI packages using `pip install -r tools/config_editor/requirements.txt`.
 
-3. Configure the compilation and ESP-IDF options as desired.
+3. Execute the script `tools/config_editor/app.py` from any folder. It will automatically detect the path to the root of the repository.
 
-4. Click on the "Compile Static Libraries" button to start the compilation process.
+4. Configure the compilation and ESP-IDF options as desired.
 
-5. The script will show the compilation output in a new screen. Note that the compilation process can take many hours, depending on the number of libraries selected and the options chosen.
+5. Click on the "Compile Static Libraries" button to start the compilation process.
 
-6. If the compilation is successful you can find the Platformio framework in the `dist` folder alongside this repository.
+6. The script will show the compilation output in a new screen. Note that the compilation process can take many hours, depending on the number of libraries selected and the options chosen.
 
+7. If the compilation is successful and the option to copy the libraries to the Arduino Core folder is enabled, it will already be available for use in the Arduino IDE. Otherwise, you can find the compiled libraries in the `esp32-arduino-libs` folder alongside this repository.
+  - Note that the copy operation doesn't currently support the core downloaded from the Arduino IDE Boards Manager, only the manual installation from the [`arduino-esp32`](https://github.com/espressif/arduino-esp32) repository.
 
 ### Documentation
 
 For more information about how to use the Library builder, please refer to this [Documentation page](https://docs.espressif.com/projects/arduino-esp32/en/latest/lib_builder.html?highlight=lib%20builder)
-
-### Development builds
-Look in release and download a version. There is the Info of the used commits of IDF / Arduino.

build.sh

@@ -1,15 +1,25 @@
 #!/bin/bash
 
 if ! [ -x "$(command -v python3)" ]; then
-    echo "ERROR: python is not installed! Please install python first."
+    echo "ERROR: python is not installed or not in PATH! Please install python first."
     exit 1
 fi
 
 if ! [ -x "$(command -v git)" ]; then
-    echo "ERROR: git is not installed! Please install git first."
+    echo "ERROR: git is not installed or not in PATH! Please install git first."
     exit 1
 fi
 
+if ! [ -x "$(command -v ninja)" ]; then
+    echo "ERROR: ninja is not installed or not in PATH! Please install ninja first."
+    exit 1
+fi
+
+# Fixes building some components. See https://github.com/espressif/arduino-esp32/issues/10167
+export IDF_COMPONENT_OVERWRITE_MANAGED_COMPONENTS=1
+
+CCACHE_ENABLE=1
+
 export TARGET="all"
 BUILD_TYPE="all"
 SKIP_ENV=0
@@ -18,8 +28,9 @@ ARCHIVE_OUT=1
 DEPLOY_OUT=0
 
 function print_help() {
-    echo "Usage: build.sh [-s] [-A <arduino_branch>] [-I <idf_branch>] [-i <idf_commit>] [-c <path>] [-t <target>] [-b <build|menuconfig|reconfigure|idf-libs|copy-bootloader|mem-variant>] [config ...]"
+    echo "Usage: build.sh [-s] [-n] [-A <arduino_branch>] [-I <idf_branch>] [-i <idf_commit>] [-c <path>] [-t <target>] [-b <build|menuconfig|reconfigure|idf-libs|copy-bootloader|mem-variant>] [config ...]"
     echo "       -s     Skip installing/updating of ESP-IDF and all components"
+    echo "       -n     Disable ccache"
     echo "       -A     Set which branch of arduino-esp32 to be used for compilation"
     echo "       -I     Set which branch of ESP-IDF to be used for compilation"
     echo "       -i     Set which commit of ESP-IDF to be used for compilation"
@@ -35,6 +46,9 @@ while getopts ":A:I:i:c:t:b:sde" opt; do
         s )
             SKIP_ENV=1
             ;;
+        n )
+            CCACHE_ENABLE=0
+            ;;
         e )
             ARCHIVE_OUT=1
             ;;
@@ -75,6 +89,8 @@ done
 shift $((OPTIND -1))
 CONFIGS=$@
 
+export IDF_CCACHE_ENABLE=$CCACHE_ENABLE
+
 # Output the TARGET array
 echo "TARGET(s): ${TARGET[@]}"
 

components/arduino_tinyusb/CMakeLists.txt

@@ -15,15 +15,20 @@ if(CONFIG_TINYUSB_ENABLED)
         "-DCFG_TUSB_DEBUG=${CONFIG_TINYUSB_DEBUG_LEVEL}"
         "-Wno-type-limits" # needed for the vanila tinyusb with turned off classes
     )
+  elseif(IDF_TARGET STREQUAL "esp32p4")
+    set(compile_options
+        "-DCFG_TUSB_MCU=OPT_MCU_ESP32P4"
+        "-DCFG_TUSB_DEBUG=${CONFIG_TINYUSB_DEBUG_LEVEL}"
+        "-Wno-type-limits" # needed for the vanila tinyusb with turned off classes
+    )
   endif()
 
   set(srcs
       # espressif:
-      "${COMPONENT_DIR}/src/dcd_esp32sx.c"
-      #"${COMPONENT_DIR}/src/dcd_dwc2.c"
+      "${COMPONENT_DIR}/src/dcd_dwc2.c"
       # tusb:
-      #"${COMPONENT_DIR}/tinyusb/src/portable/espressif/esp32sx/dcd_esp32sx.c"
-      #"{COMPONENT_DIR}/tinyusb/src/portable/synopsys/dwc2/dcd_dwc2.c"
+      #"${COMPONENT_DIR}/tinyusb/src/portable/synopsys/dwc2/dcd_dwc2.c"
+      "${COMPONENT_DIR}/tinyusb/src/portable/synopsys/dwc2/dwc2_common.c"
       "${COMPONENT_DIR}/tinyusb/src/class/cdc/cdc_device.c"
       "${COMPONENT_DIR}/tinyusb/src/class/hid/hid_device.c"
       "${COMPONENT_DIR}/tinyusb/src/class/midi/midi_device.c"
@@ -32,6 +37,7 @@ if(CONFIG_TINYUSB_ENABLED)
       "${COMPONENT_DIR}/tinyusb/src/class/dfu/dfu_rt_device.c"
       "${COMPONENT_DIR}/tinyusb/src/class/dfu/dfu_device.c"
       "${COMPONENT_DIR}/tinyusb/src/class/vendor/vendor_device.c"
+      "${COMPONENT_DIR}/tinyusb/src/class/net/ncm_device.c"
       "${COMPONENT_DIR}/tinyusb/src/common/tusb_fifo.c"
       "${COMPONENT_DIR}/tinyusb/src/device/usbd_control.c"
       "${COMPONENT_DIR}/tinyusb/src/device/usbd.c"
@@ -56,16 +62,15 @@ if(CONFIG_TINYUSB_ENABLED)
 
   set(requires esp_rom freertos soc)
   set(priv_requires arduino main)
-  ### tinyusb lib ###
-  ###################
-  idf_component_register(INCLUDE_DIRS ${includes_public} PRIV_INCLUDE_DIRS ${includes_private} SRCS ${srcs} REQUIRES ${requires} PRIV_REQUIRES ${priv_requires})
-  # add_library(${COMPONENT_TARGET} STATIC ${srcs})
-  # target_include_directories(
-  #   ${COMPONENT_TARGET}
-  #   PUBLIC ${includes_public}
-  #   PRIVATE ${includes_private})
+
+  idf_component_register(
+    INCLUDE_DIRS ${includes_public} 
+    PRIV_INCLUDE_DIRS ${includes_private} 
+    SRCS ${srcs} 
+    REQUIRES ${requires} 
+    PRIV_REQUIRES ${priv_requires}
+    )
   target_compile_options(${COMPONENT_TARGET} PRIVATE ${compile_options})
-  #target_link_libraries(${COMPONENT_TARGET} INTERFACE ${COMPONENT_TARGET})
 
 else()
 

components/arduino_tinyusb/Kconfig.projbuild

@@ -1,9 +1,10 @@
 menu "Arduino TinyUSB"
+    depends on ENABLE_ARDUINO_DEPENDS && SOC_USB_OTG_SUPPORTED
 
     config TINYUSB_ENABLED
         bool "Enable TinyUSB driver"
         default y
-        depends on IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
+        depends on IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32P4
         select FREERTOS_SUPPORT_STATIC_ALLOCATION
         select FREERTOS_USE_AUTHENTIC_INCLUDE_PATHS
         help
@@ -27,18 +28,28 @@ menu "Arduino TinyUSB"
 
         config TINYUSB_CDC_RX_BUFSIZE
             int "CDC FIFO size of RX"
-            default 64
+            default 64 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
+            default 512 if IDF_TARGET_ESP32P4
             depends on TINYUSB_CDC_ENABLED
             help
                 CDC FIFO size of RX
 
         config TINYUSB_CDC_TX_BUFSIZE
             int "CDC FIFO size of TX"
-            default 64
+            default 64 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
+            default 512 if IDF_TARGET_ESP32P4
             depends on TINYUSB_CDC_ENABLED
             help
                 CDC FIFO size of TX
 
+        config TINYUSB_CDC_MAX_PORTS
+            int "Maximum enabled CDC ports"
+            range 1 2
+            default 1
+            depends on TINYUSB_CDC_ENABLED
+            help
+                Maximum enabled CDC ports
+
     endmenu
 
     menu "Mass Storage (MSC) driver"
@@ -85,7 +96,8 @@ menu "Arduino TinyUSB"
 
         config TINYUSB_HID_BUFSIZE
             int "HID Buffer size"
-            default 64
+            default 64 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
+            default 512 if IDF_TARGET_ESP32P4
             depends on TINYUSB_HID_ENABLED
             help
                 HID Buffer size. Should be sufficient to hold ID (if any) + Data
@@ -110,14 +122,16 @@ menu "Arduino TinyUSB"
 
         config TINYUSB_MIDI_RX_BUFSIZE
             int "MIDI FIFO size of RX"
-            default 64
+            default 64 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
+            default 512 if IDF_TARGET_ESP32P4
             depends on TINYUSB_MIDI_ENABLED
             help
                 MIDI FIFO size of RX
 
         config TINYUSB_MIDI_TX_BUFSIZE
             int "MIDI FIFO size of TX"
-            default 64
+            default 64 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
+            default 512 if IDF_TARGET_ESP32P4
             depends on TINYUSB_MIDI_ENABLED
             help
                 MIDI FIFO size of TX
@@ -142,8 +156,9 @@ menu "Arduino TinyUSB"
 
         config TINYUSB_VIDEO_STREAMING_BUFSIZE
             int "VIDEO streaming endpoint size"
-            range 0 64
-            default 64
+            range 0 512
+            default 64 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
+            default 512 if IDF_TARGET_ESP32P4
             depends on TINYUSB_VIDEO_ENABLED
             help
                 VIDEO streaming endpoint size
@@ -218,20 +233,33 @@ menu "Arduino TinyUSB"
 
         config TINYUSB_VENDOR_RX_BUFSIZE
             int "VENDOR FIFO size of RX"
-            default 64
+            default 64 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
+            default 512 if IDF_TARGET_ESP32P4
             depends on TINYUSB_VENDOR_ENABLED
             help
                 VENDOR FIFO size of RX
 
         config TINYUSB_VENDOR_TX_BUFSIZE
             int "VENDOR FIFO size of TX"
-            default 64
+            default 64 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
+            default 512 if IDF_TARGET_ESP32P4
             depends on TINYUSB_VENDOR_ENABLED
             help
                 VENDOR FIFO size of TX
 
     endmenu
 
+    menu "NCM driver"
+        depends on TINYUSB_ENABLED
+
+        config TINYUSB_NCM_ENABLED
+            bool "Enable USB NCM TinyUSB driver"
+            default y
+            help
+                Enable USB NCM TinyUSB driver.
+
+    endmenu
+
     config TINYUSB_DEBUG_LEVEL
         int "TinyUSB log level (0-3)"
         default 0

components/arduino_tinyusb/include/tusb_config.h

@@ -72,11 +72,16 @@ extern "C" {
 #   define CONFIG_TINYUSB_VENDOR_ENABLED 0
 #endif
 
+#ifndef CONFIG_TINYUSB_NCM_ENABLED
+#   define CONFIG_TINYUSB_NCM_ENABLED 0
+#endif
+
 /*                      */
 /* COMMON CONFIGURATION */
 /*                      */
-
+#ifndef CFG_TUSB_MCU
 #define CFG_TUSB_MCU				OPT_MCU_ESP32S2
+#endif
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
 #define CFG_TUSB_OS                 OPT_OS_FREERTOS
 
@@ -95,15 +100,26 @@ extern "C" {
 #   define CFG_TUSB_MEM_ALIGN       TU_ATTR_ALIGNED(4)
 #endif
 
+#if CONFIG_IDF_TARGET_ESP32P4
+#define CFG_TUD_MAX_SPEED OPT_MODE_HIGH_SPEED
+#else
+#define CFG_TUD_MAX_SPEED OPT_MODE_FULL_SPEED
+#endif
+
 /*                      */
 /* DRIVER CONFIGURATION */
 /*                      */
 
 #define CFG_TUD_MAINTASK_SIZE 		4096
+#define CFG_TUD_ENDOINT_SIZE 		(TUD_OPT_HIGH_SPEED ? 512 : 64)
 #define CFG_TUD_ENDOINT0_SIZE 		64
 
 // Enabled Drivers
-#define CFG_TUD_CDC 				CONFIG_TINYUSB_CDC_ENABLED
+#ifdef CONFIG_TINYUSB_CDC_MAX_PORTS
+#define CFG_TUD_CDC 				CONFIG_TINYUSB_CDC_MAX_PORTS
+#else
+#define CFG_TUD_CDC 				0
+#endif
 #define CFG_TUD_MSC 				CONFIG_TINYUSB_MSC_ENABLED
 #define CFG_TUD_HID 				CONFIG_TINYUSB_HID_ENABLED
 #define CFG_TUD_MIDI 				CONFIG_TINYUSB_MIDI_ENABLED
@@ -112,6 +128,7 @@ extern "C" {
 #define CFG_TUD_DFU_RUNTIME			CONFIG_TINYUSB_DFU_RT_ENABLED
 #define CFG_TUD_DFU					CONFIG_TINYUSB_DFU_ENABLED
 #define CFG_TUD_VENDOR 				CONFIG_TINYUSB_VENDOR_ENABLED
+#define CFG_TUD_NCM 				CONFIG_TINYUSB_NCM_ENABLED
 
 // CDC FIFO size of TX and RX
 #define CFG_TUD_CDC_RX_BUFSIZE 		CONFIG_TINYUSB_CDC_RX_BUFSIZE