Use settings from branch idf 5.5

Author: Jason2866

configs/defconfig.esp32p4

@@ -1,20 +1,28 @@
 CONFIG_IDF_EXPERIMENTAL_FEATURES=y
 
+CONFIG_NEWLIB_NANO_FORMAT=y
+
 # Enable LP Core
 CONFIG_ULP_COPROC_ENABLED=y
 CONFIG_ULP_COPROC_TYPE_LP_CORE=y
 CONFIG_ULP_COPROC_RESERVE_MEM=8192
 
 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_360=y
 CONFIG_COMPILER_ORPHAN_SECTIONS_PLACE=y
-CONFIG_SPIRAM=y
 # CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 is not set
 CONFIG_LWIP_TCP_SACK_OUT=y
+
+CONFIG_SPIRAM=y
 CONFIG_SPIRAM_SPEED_200M=y
 CONFIG_SPIRAM_XIP_FROM_PSRAM=y
+CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
+CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY=y
+CONFIG_SPIRAM_BOOT_HW_INIT=y
+CONFIG_SPIRAM_BOOT_INIT=y
+CONFIG_SPIRAM_PRE_CONFIGURE_MEMORY_PROTECTION=y
+
 CONFIG_RTC_CLK_CAL_CYCLES=576
 # CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set
-# CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 is not set
 CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
 CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=3120
 CONFIG_CACHE_L2_CACHE_256KB=y
@@ -49,6 +57,23 @@ CONFIG_BT_NIMBLE_TRANSPORT_UART=n
 CONFIG_ESP_WIFI_REMOTE_ENABLED=y
 CONFIG_ESP_WIFI_REMOTE_LIBRARY_HOSTED=y
 
+#### Add Wi-Fi Remote config for better performance:
+CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=16
+CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=64
+CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=64
+CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y
+CONFIG_ESP_WIFI_TX_BA_WIN=32
+CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y
+CONFIG_ESP_WIFI_RX_BA_WIN=32
+
+CONFIG_LWIP_TCP_SND_BUF_DEFAULT=65534
+CONFIG_LWIP_TCP_WND_DEFAULT=65534
+CONFIG_LWIP_TCP_RECVMBOX_SIZE=64
+CONFIG_LWIP_UDP_RECVMBOX_SIZE=64
+CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=64
+
+CONFIG_LWIP_TCP_SACK_OUT=y
+
 #
 # Enable ESP Hosted BT
 # Used as VHCI transport between BT Host and Controller