Update defconfig.esp32c6

Author: Jason2866

configs/defconfig.esp32c6

@@ -42,3 +42,52 @@ CONFIG_BLE_MESH=y
 CONFIG_RTC_CLK_CAL_CYCLES=576
 # CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 is not set
 CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
+# This Enables RISCV LP for C6 - but it can't be used within Arduino at this time. 
+#CONFIG_ULP_COPROC_ENABLED=y
+#CONFIG_ULP_COPROC_LP_CORE=y
+#CONFIG_ULP_COPROC_RESERVE_MEM=4096
+
+#
+# ESP32 Arduino OpenThread Configuration
+#
+# lwIP
+#
+CONFIG_LWIP_IPV6_NUM_ADDRESSES=8
+CONFIG_LWIP_MULTICAST_PING=y
+CONFIG_LWIP_BROADCAST_PING=y
+CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_CUSTOM=y
+# end of lwip
+
+#
+# mbedTLS
+#
+CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE=y
+CONFIG_MBEDTLS_ECJPAKE_C=y
+# end of mbedTLS
+
+#
+# OpenThread
+#
+CONFIG_OPENTHREAD_ENABLED=y
+# Border Router disabled
+# CONFIG_OPENTHREAD_BORDER_ROUTER=y
+# CONFIG_OPENTHREAD_RADIO_SPINEL_UART=y
+CONFIG_OPENTHREAD_DNS64_CLIENT=y
+# Radio for RPC
+# CONFIG_OPENTHREAD_RADIO=y 
+# CONFIG_OPENTHREAD_RADIO_NATIVE=y
+# CONFIG_OPENTHREAD_DIAG=n
+CONFIG_OPENTHREAD_COMMISSIONER=y
+CONFIG_OPENTHREAD_JOINER=y
+CONFIG_OPENTHREAD_CLI=y
+CONFIG_OPENTHREAD_SRP_CLIENT=y
+CONFIG_OPENTHREAD_DNS_CLIENT=y
+# Default dataset for quick start
+CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
+CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
+CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
+CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
+CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
+CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
+CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
+# end of OpenThread